Standard
Historical
Last Updated: Aug 31, 2012
Track Document
ASTM C1181-00(2005)
Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
C1181-00R05
ASTM|C1181-00R05|en-US
Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
Standard
C1181 Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts>
new
BOS Vol. 04.02 Committee C09
$
77.00
In stock
Significance and Use
These test methods provide a means of measuring the total compressive deflection of chemical-resistant, machinery-grout materials under a sustained load at the test temperature. Test stress and temperature can be selected to simulate anticipated use conditions. For the purposes of these tests, creep is considered to be the compressive deflection in inches per inch, which occurs after the initial loading of the specimen at laboratory temperature. The results do not necessarily correlate for different specimen thicknesses. No correlation has been established to actual-use conditions.
Scope
1.1 These test methods cover a quantitative, comparative test for compressive creep of chemical-resistant grouting materials under a sustained load at a test temperature. Constant load is maintained using a bolt and spring washers. Measurements are made at laboratory temperature after exposure periods at the selected test temperature.
1.2 Test Method A outlines the molding techniques for an unbonded test specimen. Test Method B covers the molding techniques for a bonded test specimen.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information only.