Journal of Testing and Evaluation

Journal of Testing and Evaluation

About this journal

This journal is published in six issues per year. Some issues, in whole or in part, may be Special Issues focused on a topic of interest to our readers.

This flagship ASTM journal is a multi-disciplinary forum for the applied sciences and engineering. Published bimonthly, online only, the Journal of Testing and Evaluation presents new technical information, derived from field and laboratory testing, on the performance, quantitative characterization, and evaluation of materials. Papers present new methods and data along with critical evaluations; report users' experience with test methods and results of interlaboratory testing and analysis; and stimulate new ideas in the fields of testing and evaluation.

Major topic areas are fatigue, fracture, and creep, high/low temperature mechanical testing, fire testing, polymers, elastomers, wood, soils, metallics, additive manufacturing, pavement and construction materials, and statistics. Paper types include technical manuscripts, review articles, technical notes, discussions, closures, editorials, and book reviews. All papers are peer reviewed.

Call for Papers

There are no open calls for papers at this time. Please check back later for details on future special issues.

First Look Papers

Note to users: The section First Look Papers contains peer reviewed and accepted articles to be published in this journal. When the final article is assigned to an issue of the journal, the First Look Papers version will be removed from this section and will appear in the associated journal issue.

Comparative Evaluation of Outlier Detection Methods for the Asphalt Fracture Tests

ASTM International

Page Count: 12

Published Online: 12 August 2024

DOI: 10.1520/JTE20240145

Format: PDF

Price: $25

View Abstract
Fatigue Resistance of Unaged and Aged Bio-bitumen: Time Sweep Test versus Linear Amplitude Sweep Test

ASTM International

Page Count: 12

Published Online: 27 August 2024

DOI: 10.1520/JTE20240213

Format: PDF

Price: $25

View Abstract
An Innovative Data Analysis Approach via Peak-Counting–Based Segmentation for Pavement Monitoring Using FBG Sensors

ASTM International

Page Count: 11

Published Online: 10 September 2024

DOI: 10.1520/JTE20240123

Format: PDF

Price: $25

View Abstract
Assessment of Residual Stiffness Modulus of Asphalt Mixes from In-Service Pavement by Ultrasonic Testing: Anisotropy and Traffic Load Effects

ASTM International

Page Count: 17

Published Online: 14 October 2024

DOI: 10.1520/JTE20240212

Format: PDF

Price: $25

View Abstract
Exploring the Rheological Behavior of LDPE-Modified Bitumen: Influence of Plastic Source

ASTM International

Page Count: 21

Published Online: 10 January 2025

DOI: 10.1520/JTE20240131

Format: PDF

Price: $25

View Abstract
A Biorthogonal Laser Plane Based DIC Measurement and Reconstruction Method for 3-D Deformation of Transparent Soil

ASTM International

Page Count: 21

Published Online: 30 January 2025

DOI: 10.1520/JTE20240365

Format: PDF

Price: $25

View Abstract
Compiling the Programmed Load Spectrum of Machine Tools Based on ACER-Weibull Extrapolation Method and Clustering Algorithm

ASTM International

Page Count: 13

Published Online: 24 January 2025

DOI: 10.1520/JTE20230672

Format: PDF

Price: $25

View Abstract
Investigating and Characterizing Chitosan Nanoparticles for Application through Electrospraying

ASTM International

Page Count: 18

Published Online: 30 January 2025

DOI: 10.1520/JTE20240165

Format: PDF

Price: $25

View Abstract
Particle Breakage Characteristics of Coarse-Grained Filler under Heavy-Haul Train Load

ASTM International

Page Count: 14

Published Online: 24 January 2025

DOI: 10.1520/JTE20240344

Format: PDF

Price: $25

View Abstract
Optimizing Agro-based Natural Fiber Parameters to Address Binder Drainage in Open-Graded Asphalt Friction Course Mixes Employing Response Surface Methodology

ASTM International

Page Count: 25

Published Online: 24 January 2025

DOI: 10.1520/JTE20240301

Format: PDF

Price: $25

View Abstract
Long-Term Drainage Performance of Wicking Geotextile Based on Ultraviolet-Resistant Modification Treatment

ASTM International

Page Count: 20

Published Online: 13 February 2025

DOI: 10.1520/JTE20240393

Format: PDF

Price: $25

View Abstract
Enhanced Predictive Modeling and Insights into Geopolymer Concrete Compressive Strength Prediction

ASTM International

Page Count: 22

Published Online: 14 February 2025

DOI: 10.1520/JTE20230808

Format: PDF

Price: $25

View Abstract
Validation of an Accelerated Aging Protocol for Microencapsulated Mustard Oil in Emulsion

ASTM International

Page Count: 13

Published Online: 14 February 2025

DOI: 10.1520/JTE20240407

Format: PDF

Price: $25

View Abstract
Development of Activated Waste Tire Rubber Composite-Modified Asphalt and Its Performance

ASTM International

Page Count: 22

Published Online: 21 February 2025

DOI: 10.1520/JTE20240277

Format: PDF

Price: $25

View Abstract
Performance Evaluation of SBS Modified Asphalt Mixture Rejuvenated by Multifunctional Compound Rejuvenator

ASTM International

Page Count: 16

Published Online: 24 February 2025

DOI: 10.1520/JTE20230797

Format: PDF

Price: $25

View Abstract
Methodology for Using LWD Data at Different Curing Times to Assess On-Site Properties of Cement-Bitumen Treated Materials

ASTM International

Page Count: 16

Published Online: 26 February 2025

DOI: 10.1520/JTE20240246

Format: PDF

Price: $25

View Abstract
Comparative Analysis of the Polyacrylonitrile-Titania and Amidoxime Polyacrylonitrile-Titania Composite Fibers

ASTM International

Page Count: 12

Published Online: 27 February 2025

DOI: 10.1520/JTE20230777

Format: PDF

Price: $25

View Abstract
Exploring the Effects of Reclaimed Asphalt Pavement on Hot-Mix Asphalt Performance and the Use of Blending Charts to Predict Them: A Laboratory Investigation

ASTM International

Page Count: 16

Published Online: 27 February 2025

DOI: 10.1520/JTE20240236

Format: PDF

Price: $25

View Abstract
Characterizing the Variability and Reliability of Rutting Performance Using Accelerated Pavement Testing Structures

ASTM International

Page Count: 16

Published Online: 04 March 2025

DOI: 10.1520/JTE20240195

Format: PDF

Price: $25

View Abstract
Materials, Performance Studies, and Application Progress of Fiber-Reinforced 3D-Printed Concrete

ASTM International

Page Count: 27

Published Online: 07 March 2025

DOI: 10.1520/JTE20240057

Format: PDF

Price: $25

View Abstract
Mechanical Evaluation of Asphalt Mixtures Containing Recycled Bituminous Membranes (RBMs)

ASTM International

Page Count: 16

Published Online: 21 March 2025

DOI: 10.1520/JTE20240180

Format: PDF

Price: $25

View Abstract
Microcrack Propagation of Basalt Fiber Reinforced Pavement Concrete under Wheel Load and Freeze-Thaw Cycles Coupling

ASTM International

Page Count: 16

Published Online: 21 March 2025

DOI: 10.1520/JTE20240369

Format: PDF

Price: $25

View Abstract
Enhancing Water Damage Resistance of Cold-Patching Asphalt Mixture via SEBS-Cement Composite Modification: Experimental Investigation and Predictive Analysis

ASTM International

Page Count: 24

Published Online: 10 March 2025

DOI: 10.1520/JTE20240381

Format: PDF

Price: $25

View Abstract
Investigation of the Pore Structure Features of Coral Reef Limestone by Combining Polarizing Microscopy and Computed Tomography Scanning Techniques

ASTM International

Page Count: 17

Published Online: 13 March 2025

DOI: 10.1520/JTE20240399

Format: PDF

Price: $25

View Abstract
Simple Analytical Procedure to Estimate Optimum Asphalt Content

ASTM International

Page Count: 16

Published Online: 14 March 2025

DOI: 10.1520/JTE20240242

Format: PDF

Price: $25

View Abstract
Effects of a Bio-oil Additive on the Fracture Behavior of Heavy Polymer–Modified Asphalt Mixtures with High RAP Contents and Steel Slags

ASTM International

Page Count: 11

Published Online: 14 March 2025

DOI: 10.1520/JTE20240204

Format: PDF

Price: $25

View Abstract
Advanced Mixing Rheometry for Dynamic Shear Rheometer Testing of Highly Heterogeneous Bituminous Binders

ASTM International

Page Count: 18

Published Online: 14 March 2025

DOI: 10.1520/JTE20240133

Format: PDF

Price: $25

View Abstract
Investigation of Surface Texture and Degradation Characteristics of Asphalt Mixtures with Various Lithology Combinations of Aggregates

ASTM International

Page Count: 21

Published Online: 21 March 2025

DOI: 10.1520/JTE20240319

Format: PDF

Price: $25

View Abstract
Performance Evaluation of Artificial Neural Network Methods for Moisture Content Determination in Lightweight Foamed Concrete Using a Microwave Sensor

ASTM International

Page Count: 15

Published Online: 18 March 2025

DOI: 10.1520/JTE20240412

Format: PDF

Price: $25

View Abstract
Suppression Characteristics of Tourmaline Powder and Organic Montmorillonite on Bitumen Fume Production and Polycyclic Aromatic Hydrocarbons

ASTM International

Page Count: 19

Published Online: 18 March 2025

DOI: 10.1520/JTE20240329

Format: PDF

Price: $25

View Abstract
Improved Calculation of the Young’s Modulus of Rectangular Prisms from Their Resonant Frequency Overtones by Identifying Appropriate Shear Constants

ASTM International

Page Count: 18

Published Online: 24 March 2025

DOI: 10.1520/JTE20240097

Format: PDF

Price: $25

View Abstract
Performance of Concrete-Filled Steel Tubular Columns with Bi-angled Structural Steel Encasement under Axial Compression—Technical Note

ASTM International

Page Count: 14

Published Online: 24 March 2025

DOI: 10.1520/JTE20240322

Format: PDF

Price: $25

View Abstract
Experimental Study on Solidified Loess by Enzyme-Induced Carbonate Precipitation Combined with Polypropylene Fiber

ASTM International

Page Count: 18

Published Online: 27 March 2025

DOI: 10.1520/JTE20240353

Format: PDF

Price: $25

View Abstract
Investigation of the Expansion Deformation Characteristic of Compacted Predisintegrated Shale

ASTM International

Page Count: 21

Published Online: 27 March 2025

DOI: 10.1520/JTE20240367

Format: PDF

Price: $25

View Abstract
Influence of Pondus hydrogenii on Self-Healing and Permeability Properties of Bio-mortar

ASTM International

Page Count: 13

Published Online: 28 March 2025

DOI: 10.1520/JTE20240267

Format: PDF

Price: $25

View Abstract
Comparing Bitumen’s Molecular Weight Distribution Derived from Different Methods

ASTM International

Page Count: 10

Published Online: 31 March 2025

DOI: 10.1520/JTE20240215

Format: PDF

Price: $25

View Abstract

Issues

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

1993

1992

1991

1990

1989

1988

1987

1986

1985

1984

1983

1982

1981

1980

1979

1978

1977

1976

1975

1974

1973

Editorial Board

Editor-in-Chief

Dr. M. R. Mitchell, Mechanics & Materials, LLC, Flagstaff, AZ, USA

Editorial Board Members

  • Dr. Ali Abolmaali, Wayne State University, Detroit, MI, USA
  • Dr. Li Ai, University of South Carolina, Columbia, SC, USA 
  • Dr. Aziz Amoozegar, North Carolina State University, Raleigh, NC, USA
  • Dr. Farhad Aslani, University of Western Australia, Crawley, WA, Australia
  • Dr. Julija Baltušnikaitė-Guzaitienė, SRI Center for Physical Sciences and Technology, Kaunas, Lithuania 
  • Dr. Nemkumar Banthia, University of British Columbia, Vancouver, BC, Canada
  • Dr. Filippo Berto, University of Padua, Italy, and Norwegian University of Science and Technology, Trondheim
  • Dr. Krishna Prapoorna Biligiri, Indian Institute of Technology, Tirupati, Andhra Pradesh, India
  • Dr. Andrew F. Braham, University of Arkansas, Fayetteville, AR, USA
  • Dr. Andreas J. Brunner, Zürich, Switzerland
  • Professor Andrea Carpinteri, University of Parma, Parma, ITALY
  • Dr. Wen-Ruey Chang, Liberty Mutual Research Institute for Safety, Hopkinton, MA, USA
  • Dr. Dar Hao Chen, Texas A&M University, College Station, TX, USA
  • Dr. Tong Cui, Qualcomm Packaging, San Diego, CA, USA
  • Mr. John S. Dick, Alpha Technologies, Akron, OH, USA
  • Prof. Ying Fang, Xiamen University, Xiamen, China
  • Dr. Alessandro Gardi, RMIT University, Bundoora, VIC, Australia
  • Dr. Piotr Gas, AGH University of Krakow, Poland
  • Dr. Yu-Ning Louis Ge, National Taiwan University, Taipei, Taiwan
  • Dr. Meng Guo, Beijing University of Technology, Beijing, China
  • Dr. Menghuan Guo, Shenzhen University, Shenzhen, China 
  • Dr. Rajeev Kumar Gupta, NC State University, Raleigh, NC, USA
  • Dr. Chanjuan (Crystal) Han, Shanghai Jiao Tong University, Shanghai, China 
  • Prof. Jim Hartman, AZGaitero Engineering, Tempe, AZ, USA
  • Dr. Leila Hashemian, University of Alberta, Edmonton, Alberta, Canada
  • Dr. Maryam Hojati, University of New Mexico, Albuquerque, NM, USA 
  • Mr. Hui-Min (Hui) Huang, National Institute for Standards and Technology (NIST), Gaithersburg, MD, USA
  • Dr. Richard (Yu) Jiang, University of Cambridge, Cambridge, United Kingdom 
  • Dr. ShanShan Jin, Beijing University of Civil Engineering and Architecture, Beijing, China 
  • Dr. Amin Joodaky, Michigan State University, East Lansing, MI, USA
  • Dr. Sreeramesh Kalluri, Ohio Aerospace Institute, Brook Park, OH, USA
  • Dr. Sivakumar Kandasami, Larsen & Toubro Construction, Chennai, India
  • Dr. Xiaoming Huang, Southeast University, Nanjing, China
  • Dr. Xin Kang, Hunan University, Hunan, Changsha, China
  • Dr. Vistasp Karbhari, University of Texas at Arlington, Arlington, TX, USA
  • Dr. Behnoud Kermani, The Transtec Group, Inc., Enola, PA
  • Dr. Prince Waqas Khan, West Virginia University, Morgantown, WV, USA 
  • Dr. Yong-Rak Kim, University of Nebraska-Lincoln, Lincoln, NE, USA
  • Dr. Young Hoon Kim, University of Louisville, Louisville, KY, USA
  • Dr. Eva Lantsoght, Delft University of Technology, Delft, Netherlands, and Universidad San Francisco de Quito
  • Dr. Mohammad J. Mahtabi, University of Tennessee at Chattanooga, Chattanooga, TN, USA
  • Dr. Susan M. Marvin, Federal Bureau of Investigation Laboratory, Quantico, VA, USA
  • Douglas C. Meier, National Institute of Standards and Technology, Gaithersburg, MD, USA
  • Dr.-Ing. Miomir Miljković, University of Niš, Niš, Serbia
  • Dr. Xueqian Ni, Central South University, Changsha, Hunan, China 
  • Mr. Thomas F. O’Connor, Milan, MI, USA
  • Dr. Božidar V. Popović, University of Montenegro, Podgorica, Montenegro
  • Dr. Luis Reis, Instituto Superior Técnico, Lisbon, Portugal
  • Dr. Elena Romeo, University of Parma, Parma, Italy
  • Dr. Gourab Saha, National Institute of Technology Rourkela, Sundargarh, India
  • Dr. Xiomara Sanchez Castillo, University of New Brunswick, Fredericton, NB, Canada 
  • Dr. Rajarshi Saha, Bridgelux, Inc., Livermore, CA
  • Dr. Scott A. Schroeder, Exponent, Los Angeles, CA, USA
  • Dr. Steven J. Shaffer, Shaffer Tribology Consulting, Campbell, CA, USA
  • Dr. Suraj Sharma, University of Georgia, Athens, GA, USA
  • Dr. Ranganath K. Shastri, Plastics Solutions, Midland, MI, USA
  • Dr. Punith V. Shivaprasad, Clemson University, Clemson, SC, USA
  • Dr. Mark Sidebottom, Miami University, Oxford, OH, USA
  • Dr. Cy (Chor-yiu) Sin, National Tsing Hua University, Hsinchu, Taiwan, R.O.C
  • Dr. C. Elizabeth Stokes, Mississippi State University, Starkville, MS, USA
  • Dr. Stein Sture, University of Colorado at Boulder, Boulder, CO, USA
  • Dr. Xiao Tan, Hohai University, Nanjing, China 
  • Dr. Julian Tao, University of Akron, Akron, OH, USA
  • Dr. Blanka Tomkova, Technical University of Liberec, Liberec, Czech Republic
  • Dr. Sabrina Vantadori, University of Parma, Parma, Italy
  • Dr. Sandra Varnaitė-Žuravliova, Center for Physical Sciences and Technology, Kaunas, Lithuania
  • Dr. Matthieu Vignes, Massey University Manawatu, Palmerston North, New Zealand
  • Dr. Hao Wang, Rutgers, The State University of New Jersey, Piscataway, NJ
  • Dr. Jinfeng Wang, Zhejiang University, Hangzhou, China
  • Dr. Shuying Wang, Central South University, Hunan, China
  • Dr. Xuefei (Sophie) Wang, Hebei University of Technology, Tianjin, China 
  • Dr. Shaopeng Wu, Wuhan University of Technology, Wuhan, China
  • Dr. Shenghua Wu, University of South Alabama, Mobile AL, USA
  • Professor Feipeng Xiao, Clemson University, Clemson, SC, USA
  • Dr. Yang Xiao, Chongqing University, Chongqing, China
  • Dr. Aref Yadollahi, Purdue University Northwest, Hammond, IN, USA 
  • Dr. Fangwei Yu, Chinese Academy of Sciences, Chengdu, China
  • Dr. Xiong Yu, Case Western Reserve University, Cleveland, OH, USA
  • Professor Menglan Zeng, Hunan University, Changsha, P.R. China
  • Dr. Henglong Zhang, Hunan University, Changsha, China
  • Dr. Xijin (Emma) Zhang, George Mason University, Fairfax, VA, USA 

Author Instructions

  • Submit your paper online using the Online Paper Submittal tab.
  • You must accept the ASTM copyright transfer agreement.
  • Submit only original work. Previously published papers are never acceptable.
  • Author Instructions for best practices and the ASTM Style Manual can be found here.
  • Provide complete references so all authors get credit for their work and papers are accepted by indexing and literature search services.
  • Written permission from the copyright holder must be submitted for any quotes, tables, or figures with appropriate credit.
  • All artwork will appear in color online and in black and white if printed so be sure your color materials are understandable in black and white. This includes text so don’t refer to the “blue” area but rather the dark area, bold line, dotted line, etc.
  • All papers are reviewed by at least two anonymous peer reviewers.
  • Your approved, peer-reviewed paper will be copy-edited and formatted. You will be asked to approve the final version.
  • Upon approval of the edited version, your paper will be published in the electronic journal.

Subscription Information

Individual*

How does it work?

You receive a User ID and Password to login to your subscription.

Online only: $337

*Individual subscriptions provide single user access for 12 months via username and password.

Individual article downloads available for $25 directly from the website

Institutional**

How does it work?

Access is by IP address.

Online only: $599

Please contact Sales or call 1-877-909-ASTM.
**Institutional subscriptions provide single site (one geographic location) access for 12 months via IP address.

For Multi-site subscription and pricing, please contact Sales or call 1-877-909-ASTM.

Subscription Period

This subscription ends 12 months from the day your order is processed.

Read ASTM License Agreement
Indexed In
Impact Factor 0.8
Five Year Impact Factor 0.9

Science Citation Index®

Science Citation Index Expanded™

Chemical Abstracts Service

Current Contents®/ Engineering Computing & Technology

EI COMPENDEX®

Google Scholar

Scopus

Details
ISSN: 0090-3973
E-ISSN: 1945-7553
Coden: JTEVAB