Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)

Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673) F2257-03 ASTM|F2257-03|en-US Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673) Standard F2257 Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)> new BOS Vol. 13.01 Committee F04

$ 77.00 In stock

Abstract

This specification covers the requirements for wrought seamless or welded and drawn 18chromium-14nickel-2.5molybdenum stainless steel small diameter tubing for surgical implants. Manufacturing method shall be seamless or welded and drawn process. Tubing shall conform to chemical composition, dimensions, and mechanical properties of this specification. Mechanical properties include ultimate tensile strength, yield strength, and elongation. Outside and inside diameter, wall thickness, length and straightness shall conform to the permissible limits of this specification.

Scope

1.1 This specification covers the requirements for wrought 18chromium-14nickel-2.5molybdenum stainless steel tubing used for the manufacture of surgical implants. Material shall conform to the applicable requirements of Specification F 138 (for seamless) or Specification F 139 (for welded and drawn). This specification addresses those product variables that differentiate small-diameter medical grade tubing from the bar, wire, sheet, and strip product forms covered in these specifications.

1.2 This specification applies to straight length tubing with 0.125 in. (3.15 mm) and smaller nominal outside diameter (OD) and 0.018 in. (0.46 mm) and thinner nominal wall thickness.

1.3 The values stated in inch-pound units are to be regarded as the standard. The SI units in parentheses are approximate.

Version

Language

Format

Price:

Shipping & Handling

Domestic Shipping

Domestic orders are delivered via United Parcel Service (UPS) or United States Postal Service (USPS). Transit times average 3 to 5 business days. Please be aware that UPS will not deliver packages to Post Office Boxes.

Domestic Rush Orders

Please Contact Us.

International Standard Shipping

International orders are delivered via courier post services which can be either a postal service, courier service, or a combination of both. Standard Service is untraceable. Please allow 4-7 weeks for delivery.

International Expedited Shipping

Please Contact Us.

Please be aware that carriers will not deliver packages to Post Office Boxes. Because of the variability of customs processes and procedures in different countries, ASTM International cannot guarantee transit times to international destinations. Customs duty and taxes are the responsibility of the consignee.

Shipping & Handling charges follow the rate schedule, below:

Order Total	Shipping & Handling Fee (US Domestic)
Up to $50.00	$18.72
$50.01 to $100.00	$20.80
$100.01 to $150.00	$29.52
$150.01 to $250.00	$39.09
$250.01 to $500.00	$56.25
$500.01 to $750.00	$76.42
$750.01 to $1000.00	$93.15
$1000.01 to $1500.00	$121.27
$1500.01 to $2500.00	$158.38
$2500.01 to $4999.00	$209.04
$5000.00 to higher	FREE

Order Total	Shipping & Handling Fee (International)
Up to $50.00	$68.72
$50.01 to $100.00	$70.80
$100.01 to $150.00	$79.52
$150.01 to $250.00	$89.09
$250.01 to $500.00	$106.25
$500.01 to $750.00	$126.42
$750.01 to $1000.00	$143.15
$1000.01 to $1500.00	$171.27
$1500.01 to $2500.00	$208.38
$2500.01 to $4999.00	$259.04
$5000.00 to higher	FREE

Shipping and Handling charges are approximate. Additional charges may be incurred if your order requires multiple shipments. This does not apply to complete sets and sections.

ASTM License Agreement

Reprints and Permissions

Reprints and copyright permissions can be requested through the
Copyright Clearance Center

Details

Book of Standards Volume: 13.01

Developed by Subcommittee: F04.12

Pages: 4

DOI: 10.1520/F2257-03

ICS Code: 11.040.40

Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)

Related

Reprints and Permissions

Details