Standard
Historical
Last Updated: Feb 13, 2014
Track Document
ASTM F1790-05
Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing
Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing
F1790-05
ASTM|F1790-05|en-US
Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing
Standard
F1790 Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing>
new
BOS Vol. 11.03 Committee F23
$
86.00
In stock
Significance and Use
This test method assesses the cut resistance of a material when exposed to a cutting edge under specified loads. Data obtained from this test method can be used to compare the cut resistance of different materials.
This test method only addresses that range of cutting hazards that are related to a cutting action across the surface of the material. It is not representative of any other cutting hazard to which the material may be subjected such as serrated edges, saw blades or motorized cutting tools. Nor is it representative of puncture, tear, or other modes of fabric failure.
Scope
1.1 This test method covers the measurement of the cut resistance of a material when mounted on a mandrel and subjected to a cutting edge under a specified load.
1.1.1 This procedure is not valid for high-porosity materials which allow cutting edge contact with the mounting surface prior to cutting.
1.1.2 Test apparatus may have limitations in testing thicker materials; see the Annex, or the equipment manufacturer's specifications.
1.2 The values stated in SI units or in other units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.