Standard
Active
Last Updated: May 29, 2024
Track Document
ASTM F1578-24
Standard Test Method for Contact Closure Cycling of a Membrane Switch
Standard Test Method for Contact Closure Cycling of a Membrane Switch
F1578-24
ASTM|F1578-24|en-US
Standard Test Method for Contact Closure Cycling of a Membrane Switch
Standard
F1578 Standard Test Method for Contact Closure Cycling of a Membrane Switch>
new
BOS Vol. 02.04 Committee B02
$
64.00
In stock
ASTM International
Significance and Use
4.1 This testing is performed to determine the electrical contact reliability under switching conditions and the physical changes caused by mechanical actuation of the switch assembly in the environments in which the assemblies operate. Evidence of deterioration, that is, cracking of substrate, domes both metal and polyester, ink delamination, etc., resulting from this test can at times be determined by visual examination. However, the effects may be more readily ascertained by measurements made prior to, during, and after exposure. Total circuit resistance, force-displacement, dielectric strength, insulation resistance, and capacitance are types of measurements that show the deleterious effects due to exposure.
Scope
1.1 This test method covers the setup, procedure, and apparatus required to depress and release a membrane switch to a predetermined number of cycles.
1.2 This test method also covers the optional use of specified voltage and current during the cycling of the membrane switch.
1.3 This test method can be used in conjunction with other ASTM standards such as Test Method F1596.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.