Standard
Historical
Last Updated: Dec 31, 2010
Track Document
ASTM F1441-03
Standard Specification for Soft-Tissue Expander Devices
Standard Specification for Soft-Tissue Expander Devices
F1441-03
ASTM|F1441-03|en-US
Standard Specification for Soft-Tissue Expander Devices
Standard
F1441 Standard Specification for Soft-Tissue Expander Devices>
new
BOS Vol. 13.01 Committee F04
$
86.00
In stock
Abstract
This specification covers the requirements for single use saline inflatable, smooth and textured tissue expansion devices to be used intraoperatively or implanted for typically less than 6 months and then removed. This specification applies only to soft-tissue expander devices fabricated with elastomer shells. It does not necessarily cover any custom fabricated soft tissue expander device manufactured to any other specification. The device shall be classified as: Type I; Type II; and Type III. Biocompatibility, tensile set, breaking force, tubing shell junction, injection port competence, overexpansion, tubing length adapter strength, needle stop penetration, and fused or adhered joints tests shall be performed to conform with the specified requirements.
Scope
1.1 This specification covers the requirements for single use saline inflatable, smooth and textured tissue expansion devices to be used intraoperatively or implanted for typically less than 6 months and then removed.
1.2 Limitations:
1.2.1 This specification applies only to soft-tissue expander devices fabricated with elastomer shells. It does not necessarily cover any custom fabricated soft tissue expander device manufactured to any other specification.
1.2.2 This specification applies, in part, to combination "expander/mammary" devices as classified in Section 4.
1.3 The values stated in SI units are to be regarded as standard, values in parentheses are for information only.
1.4 The following statement pertains only to the test methods and requirements portion, Section 9, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.