Standard
Active
Last Updated: Jul 29, 2024
Track Document
ASTM F1333-91(2024)
Standard Specification for Construction of Fire and Foam Station Cabinets
Standard Specification for Construction of Fire and Foam Station Cabinets
F1333-91R24
ASTM|F1333-91R24|en-US
Standard Specification for Construction of Fire and Foam Station Cabinets
Standard
F1333 Standard Specification for Construction of Fire and Foam Station Cabinets>
new
BOS Vol. 01.07 Committee F25
$
72.00
In stock
ASTM International
Abstract
This specification provides design and construction criteria for double and single fire and foam station cabinets. These cabinets are classified as Type I (single cabinet) and Type II (double cabinets). Type I cabinets are further subdivided into two grades: Grade 1 which has a right-hand door and Grade 2 with a left-hand door. Each of these grades has three classes according to material: Class A is made of mild steel, Class B with stainless steel, and Class C with aluminium. On the other hand, Type II cabinets have only one grade, Grade 1 with right-hand door active leaf. This grade is further classified into three classes: Class A, Class B, and Class C. The parts of these cabinets shall include: frame, hinge pad, hinge, brace, door, staple, hook, latch, keeper, rivet, clip, snubber, retainer, saddle, strap, clip, washer, back, leg, bolt, and back bar. Fire and foam cabinets shall be free of weld spatter, burrs, and sharp corners, rough edges, and other defects which might be hazardous to personnel and equipment.
Scope
1.1 This specification provides design and construction criteria for double and single fire and foam station cabinets. See Fig. 1 and Fig. 2. Valves, hose, and fittings are not included.
FIG. 1 Fire and Foam Cabinet—Type I
Note 1: 1 in. = 25.4 mm.
FIG. 2 Fire and Foam Cabinet—Type II
1.2 Optional back and legs may be provided.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.