Standard
Historical
Last Updated: Jul 21, 2023
Track Document
ASTM F1072-94(2018)
Standard Specification for Expanded-Metal Doors
Standard Specification for Expanded-Metal Doors
F1072-94R18
ASTM|F1072-94R18|en-US
Standard Specification for Expanded-Metal Doors
Standard
F1072 Standard Specification for Expanded-Metal Doors>
new
BOS Vol. 01.07 Committee F25
$
86.00
In stock
ASTM International
Abstract
This specification covers steel expanded-metal doors suitable for installation in expanded-metal bulkheads, structural bulkheads, and structural arches. Expanded-metal doors are furnished in four types: Type I (right hand), Type II (left hand), Type III (right hand reverse) and Type IV (left hand reverse). Doors shall be furnished with the vertical support channels and top angle in place. A temporary brace shall be included at the frame bottom to prevent racking. Doors shall be fitted with rubber-tipped bumpers and a manually operated catch for holding doors in an open position. Provision shall be made for the installation of a rim latch set operated by knobs on both sides. Doors and frames shall be free from all cracks, burrs, sharp edges, and other defects.
Scope
1.1 This specification covers steel expanded-metal doors suitable for installation in expanded-metal bulkheads, structural bulkheads, and structural arches.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.