Standard
Historical
Last Updated: Dec 31, 2010
Track Document
ASTM F468-06e1
Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
F0468-06E01
ASTM|F0468-06E01|en-US
Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
Standard
F468 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use>
new
BOS Vol. 01.09 Committee F16
$
96.00
In stock
Significance and Use
p>For purposes of determining compliance with the specified limits for requirements of the properties listed in this specification, an observed value or calculated value shall be rounded in accordance with Practice E 29.
Abstract
This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs manufactured from a number of alloys in common use and are intended for general service applications. The specimens shall be made of materials that conform to the chemical composition requirements for copper, nickel, aluminum, and titanium alloys that are to be determined by chemical analysis. Manufacturing of the specimens shall be by cold or hot forming or machining and stress relieving. Tension, hardness, and shear tests shall be performed to determine the mechanical properties of the specimen which shall be in compliance with the tensile strength, yield strength, elongation, hardness, and shear strength requirements.
Scope
1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs 0.250 to 1.500 in. inclusive in diameter manufactured from a number of alloys in common use and intended for general service applications.
1.2 Applicable nuts for use with bolts, cap screws, and studs covered by this specification are covered by Specification F 467 Note 1—A complete metric companion to Specification F 468 has been developed—F 468M; therefore no metric equivalents are presented in this specification.