Standard
Historical
Last Updated: Apr 05, 2023
Track Document
ASTM F34-13(2018)
Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials
Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials
F0034-13R18
ASTM|F0034-13R18|en-US
Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials
Standard
F34 Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials>
new
BOS Vol. 15.10 Committee F02
$
72.00
In stock
Significance and Use
5.1 Knowledge of extractives from flexible barrier materials may serve many useful purposes. A test cell constructed as described in this practice may be used for obtaining such data. Another test cell has been found equivalent to the one described in this practice. See the appendix for the source of the alternate cell.
5.2 United States Federal Regulations 21CFR 176.170 (d)(3), 21CFR 177.1330 (e)(4), 21CFR 177.1360 (b), 21CFR 177.1670 (b), and 21CFR Appendix VI (b) cite this standard practice as the basis for determining the amount of extractables from the surface of a package or multilayer film or modified paper in contact with food. In some cases, it is the only practice defined for this purpose. No alternative detail is given in the regulations for conducting extractions.
5.3 Test Method D4754 is not an equivalent to this test method. It is for two-sided extraction of films having the same material on both of the exposed surfaces of the film.
Scope
1.1 This practice covers the construction of test cells which may be used for the extraction of components from flexible barrier materials by suitable extracting liquids, including foods and food simulating solvents.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.