Standard
Historical
Last Updated: Jan 09, 2020
Track Document
ASTM E977-05(2014)
Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials
Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials
E0977-05R14
ASTM|E0977-05R14|en-US
Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials
Standard
E977 Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials>
new
BOS Vol. 03.03 Committee E07
$
77.00
In stock
Abstract
This practice covers the procedure for sorting electrically conductive materials using the thermoelectric method, which is based on the seebeck effect. The procedure relates to the use of direct- and comparator-type thermoelectric instruments for distinguishing variations in materials which affect the thermoelectric properties of those materials. The two techniques that are primarily used in thermoelectric sorting are direct and comparative instrumentation. In the direct instruments, equipment is standardized by placing materials with known chemistry and metallurgical structure in the test system. In the comparative instruments, the thermoelectric response of the test piece is compared with that of a known standard(s) and the response indicates whether the piece is within the acceptance limits. The electronic apparatus shall be capable of maintaining a sufficient temperature differential across the electrodes to produce a suitable thermoelectric voltage. The different procedures for sorting electrically conductive materials are presented in details.
Scope
1.1 This practice covers the procedure for sorting materials using the thermoelectric method, which is based on the Seebeck effect. The procedure relates to the use of direct- and comparator-type thermoelectric instruments for distinguishing variations in materials which affect the thermoelectric properties of those materials.
1.2 While the practice is most commonly applied to the sorting of metals, it may be applied to other electrically conductive materials.
1.3 Thermoelectric sorting may also be applied to the sorting of materials on the basis of plating thickness, case depth, and hardness.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.