Standard
Historical
Last Updated: Aug 06, 2012
Track Document
ASTM D7073-05
Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films
Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films
D7073-05
ASTM|D7073-05|en-US
Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films
Standard
D7073 Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films>
new
BOS Vol. 06.02 Committee D01
$
77.00
In stock
Significance and Use
Laboratory measurement of application properties of architectural coatings generally employ a blade-type applicators that lay down films of highly uniform thickness. Applicators, such as brushes and rollers, typically apply films that lack uniformity due to variations in rheology, film build, flow and leveling properties resulting in the practical hiding of most paints being less than that measured on films applied with a blade-type applicator. This guide provides an indication of the actual application properties of the paint, as applied by a contractor or consumer.
Scope
1.1 This guide describes procedures for the application of brush or roller, or both, applied paint films to sealed wallboard for evaluating application properties.
1.2 Because both the application and panel evaluation are subjective, this guide should be used only for comparative testing within one laboratory using one operator for each set of applications, as the ratings assigned by different laboratories may not agree.
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.