Standard
Active
Last Updated: Dec 08, 2020
Track Document
ASTM D5496-15(2020)
Standard Practice for In-Field Immersion Testing of Geosynthetics
Standard Practice for In-Field Immersion Testing of Geosynthetics
D5496-15R20
ASTM|D5496-15R20|en-US
Standard Practice for In-Field Immersion Testing of Geosynthetics
Standard
D5496 Standard Practice for In-Field Immersion Testing of Geosynthetics>
new
BOS Vol. 04.13 Committee D35
$
64.00
In stock
Significance and Use
4.1 This practice provides an approach and methodology for conducting field immersion testing of geosynthetics used in the construction of liners in reservoirs, ponds, impoundments, or landfills for containing liquids and solids. This practice should be performed in accordance to and in conjunction with Practice D5322 for assessing chemical resistance under both laboratory and field conditions.
4.2 The specification of procedures in this practice is intended to serve as a guide for those wishing to compare or investigate the chemical resistance of geosynthetics under actual field conditions.
Scope
1.1 This practice describes an approach and methodology for immersion testing of geosynthetics (for example, geomembranes used for landfill liner).
1.2 This practice does not provide for definition of the testing to be performed on the geosynthetic samples for field immersion. This practice does not address the determination of resistance of the geosynthetic to the liquid in which it is immersed. The user of this practice is referred to the appropriate Standard Guide for Tests to evaluate the chemical resistance and for defining the testing to be performed for each of the geosynthetic components listed in 2.1.
Note 1: EPA Method 9090 has been used in the past to investigate the compatibility of geomembrane to leachates.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.