Standard
Historical
Last Updated: Dec 31, 2010
Track Document
ASTM D5375/D5375M-98(2004)
Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock
Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock
D5375_D5375M-98R04
ASTM|D5375_D5375M-98R04|en-US
Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock
Standard
D5375/D5375M Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock>
new
BOS Vol. 15.10 Committee D10
$
77.00
In stock
Significance and Use
These test methods are a tool for development and quality assurance use. Given a specific pressure-sensitive label and liner and a requirement in terms of the minimum for maximum peel value expected for this liner removal from the label, the data from the test can be used in conjunction with acceptance criteria.
Scope
1.1 These test methods cover the measurement of the adherence of the release liner to the adhesive of a pressure-sensitive adhesive label.
1.2 These test methods provide means of assessing the uniformity of the adhesion to the liner of a given type of pressure-sensitive label. The assessment may be within a sheet or roll between sheets or rolls or between production lots.
1.3 Variation in the label backing, liner, liner release coating, adhesive, and adhesive coating weight, affect the response. Therefore, these methods cannot be used to pinpoint the specific cause(s) of nonuniformity.
1.4 These test methods may not be appropriate to test labels having either relatively stiff backings or stiff liners, or backings showing high stretch at low forces. These characteristics will result in a high variability of the test response that is not a true indication of the real nature of the adhesive bond.
1.5 The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only.
1.6 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.