Standard
Historical
Last Updated: Jul 04, 2019
Track Document
ASTM D3633/D3633M-12
Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems
Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems
D3633_D3633M-12
ASTM|D3633_D3633M-12|en-US
Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems
Standard
D3633/D3633M Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems>
new
BOS Vol. 04.03 Committee D04
$
77.00
In stock
Significance and Use
This test method for measuring the electrical resistivity of water-barrier membrane-pavement systems may be interpreted to indicate the effectiveness of such systems.
This test method is predicated on the fact that an electrical connection between the surface of the pavement and the reinforcing steel in the concrete pavement cannot be made through an impermeable water-barrier membrane.
This test method may be used for acceptance when the accepting agency specifies the minimum resistance value desired.
Scope
1.1 This test method covers the measurement of the electrical resistivity of water-barrier membrane-pavement systems when applied to concrete bridge decks.
1.2 Measurements shall be performed on the bituminous pavement surface covering the water-barrier membrane.
1.3 This test method utilizes a measure of electrical resistance between the saturated top surface of the water-barrier membrane and the reinforcing steel embedded in the concrete bridge deck.
1.4 The values measured represent the electrical resistance obtained with the equipment and procedures stated herein and do not necessarily agree or correlate with those using other equipment or procedures.
1.5 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.