Standard
Historical
Last Updated: Jun 15, 2011
Track Document
ASTM D3326-07
Standard Practice for Preparation of Samples for Identification of Waterborne Oils
Standard Practice for Preparation of Samples for Identification of Waterborne Oils
D3326-07
ASTM|D3326-07|en-US
Standard Practice for Preparation of Samples for Identification of Waterborne Oils
Standard
D3326 Standard Practice for Preparation of Samples for Identification of Waterborne Oils>
new
BOS Vol. 11.02 Committee D19
$
86.00
In stock
Significance and Use
Identification of a recovered oil is determined by comparison with known oils selected because of their possible relationship to the particular recovered oil, for example, suspected or questioned sources. Thus, samples of such known oils must be collected and submitted along with the unknown for analysis. It is unlikely that identification of the sources of an unknown oil by itself can be made without direct matching, that is, solely with a library of analyses.
Scope
1.1 This practice covers the preparation for analysis of waterborne oils recovered from water. The identification is based upon the comparison of physical and chemical characteristics of the waterborne oils with oils from suspect sources. These oils may be of petroleum or vegetable/animal origin, or both. Seven procedures are given as follows:
1.2 Procedures for the analytical examination of the waterborne oil samples are described in Practice D 3415, D 3328, D 3414, and D 3650. Refer to the individual oil identification test methods for the sample preparation method of choice. The deasphalting effects of the sample preparation method should be considered in selecting the best methods.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.