Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings

Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings D2513-03 ASTM|D2513-03|en-US Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings Standard D2513 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings> new BOS Vol. 08.04 Committee F17

$ 125.00 In stock

Scope

1.1 This specification covers requirements and test methods for material (see Appendix X1) dimensions and tolerances, hydrostatic burst strength, chemical resistance, and impact resistance of plastic pipe, tubing, and fittings for use in fuel gas mains and services for direct burial and reliner applications. The annexes provide specific requirements and test methods for each of the materials currently approved. If and when additional materials are available, specific annex requirements will be added. The pipe and fittings covered by this specification are intended for use in the distribution of natural gas. Requirements for the qualifying of polyethylene systems for use with liquefied petroleum gas are covered in Annex A1.

1.1.1 This specification does not cover threaded pipe. Design considerations are discussed in Appendix X2. In-plant quality control programs are specified in Annex A3 and Annex A4.

1.2 The text of this specification references notes, footnotes, and appendixes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification.

1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information purposes only.

1.4 The following is an index of the annexes and appendixes in this specification:

Annex	Subject
A1	Polyethylene (PE) Pipe and Fittings
A2	Poly (Vinyl Chloride) (PVC) Pipe and Fittings for Maintenance or Repair
A3	In-Plant Quality Control for all materials up to 12 in.
A4	In-Plant Quality Control for PE materials between 14 and 24 in.
A5	Polyamide (PA) Pipe and Fittings
A6	Magnetic-detectable Polyethylene Pipe
Appendixes	Subject
X1	New Materials
X2	Design Consideration

The following precautionary caveat pertains only to the test method portion, Section 6, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Version

Language

Format

Price:

Shipping & Handling

Domestic Shipping

Domestic orders are delivered via United Parcel Service (UPS) or United States Postal Service (USPS). Transit times average 3 to 5 business days. Please be aware that UPS will not deliver packages to Post Office Boxes.

Domestic Rush Orders

Please Contact Us.

International Standard Shipping

International orders are delivered via courier post services which can be either a postal service, courier service, or a combination of both. Standard Service is untraceable. Please allow 4-7 weeks for delivery.

International Expedited Shipping

Please Contact Us.

Please be aware that carriers will not deliver packages to Post Office Boxes. Because of the variability of customs processes and procedures in different countries, ASTM International cannot guarantee transit times to international destinations. Customs duty and taxes are the responsibility of the consignee.

Shipping & Handling charges follow the rate schedule, below:

Order Total	Shipping & Handling Fee (US Domestic)
Up to $50.00	$18.72
$50.01 to $100.00	$20.80
$100.01 to $150.00	$29.52
$150.01 to $250.00	$39.09
$250.01 to $500.00	$56.25
$500.01 to $750.00	$76.42
$750.01 to $1000.00	$93.15
$1000.01 to $1500.00	$121.27
$1500.01 to $2500.00	$158.38
$2500.01 to $4999.00	$209.04
$5000.00 to higher	FREE

Order Total	Shipping & Handling Fee (International)
Up to $50.00	$68.72
$50.01 to $100.00	$70.80
$100.01 to $150.00	$79.52
$150.01 to $250.00	$89.09
$250.01 to $500.00	$106.25
$500.01 to $750.00	$126.42
$750.01 to $1000.00	$143.15
$1000.01 to $1500.00	$171.27
$1500.01 to $2500.00	$208.38
$2500.01 to $4999.00	$259.04
$5000.00 to higher	FREE

Shipping and Handling charges are approximate. Additional charges may be incurred if your order requires multiple shipments. This does not apply to complete sets and sections.

ASTM License Agreement

Reprints and Permissions

Reprints and copyright permissions can be requested through the
Copyright Clearance Center

Details

Book of Standards Volume: 08.04

Developed by Subcommittee: F17.60

Pages: 24

DOI: 10.1520/D2513-03

ICS Code: 23.040.20; 23.040.45

Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings

Related

Reprints and Permissions

Details