Standard
Historical
Last Updated: Nov 29, 2016
Track Document
ASTM D217-10
Standard Test Methods for Cone Penetration of Lubricating Grease
Standard Test Methods for Cone Penetration of Lubricating Grease
D0217-10
ASTM|D0217-10|en-US
Standard Test Methods for Cone Penetration of Lubricating Grease
Standard
D217 Standard Test Methods for Cone Penetration of Lubricating Grease>
new
BOS Vol. 05.01 Committee D02
$
96.00
In stock
Significance and Use
These cone penetration tests not only evaluate the consistency of lubricating greases over the full range of NLGI numbers from 000 to 6, but also evaluate the consistency of stiff greases having penetration numbers less than 85. In contrast, Test Method D937 is aimed at petrolatums and Test Method D1403 uses less precise one-quarter and one-half scale equipment intended for use when the sample quantity is limited.
Cone penetration test results provide one measure of the consistency of a grease. Worked penetration results are required to determine to which NLGI consistency grade a grease belongs. Undisturbed penetration results provide a means of evaluating the effect of storage conditions on grease consistency.
Although no correlation has been developed between cone penetration results and field service, the cone penetrations obtained by the four procedures are widely used for specification purposes, such as in users' material specifications and suppliers' manufacturing specifications.
Scope
1.1 These test methods cover four procedures for measuring the consistency of lubricating greases by the penetration of a cone of specified dimensions, mass, and finish. The penetration is measured in tenths of a millimetre.
Note 1—The National Lubricating Grease Institute (NLGI) classified greases according to their consistency as measured by the worked penetration. The classification system is as follows: