Standard
Historical
Last Updated: Dec 31, 2010
Track Document
ASTM C1311-02
Standard Specification for Solvent Release Sealants
Standard Specification for Solvent Release Sealants
C1311-02
ASTM|C1311-02|en-US
Standard Specification for Solvent Release Sealants
Standard
C1311 Standard Specification for Solvent Release Sealants>
new
BOS Vol. 04.07 Committee C24
$
77.00
In stock
Abstract
This specification describes the properties of one-component solvent release sealants for use in building construction. These sealants are generally formulated to withstand a specified maximum joint movement in extension and compression of the nominal joint width. The sealants shall be tested, and is expected to conform to the following physical properties: extrudability after aging, shore A hardness, indentation hardness, bubbling, adhesive and cohesive loss after cyclic movement, slump, stain index, tack-free time, and accelerated weathering (edge cracking, center cracking, adhesion loss, and color change).
Scope
1.1 This specification describes the properties of a one-component solvent release sealant for use in building construction. These sealants are generally formulated to withstand a maximum joint movement of 7.5 % in extension and 7.5 % in compression of the nominal joint width.
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3 The committee with jurisdiction of this specification is not aware of any similar specification within ISO or any other organization.