Standard
Historical
Last Updated: Oct 03, 2019
Track Document
ASTM C1047-14a
Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
C1047-14A
ASTM|C1047-14A|en-US
Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
Standard
C1047 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base>
new
BOS Vol. 04.01 Committee C11
$
77.00
In stock
Abstract
This specification covers accessories used in conjunction with assemblies of gypsum wallboard and gypsum veneer base to protect edges and corners and to provide architectural features. Steel accessories and steel components of accessories manufactured from steel and paper in combination shall be manufactured from zinc-coated cold-roll sheet steel before application of coating. Phosphatizing or other surface treatments may be used to ensure compatibility and bond. Paper components of accessories manufactured from steel and paper in combination shall comply with requirements for thickness, tensile strength, dimensional stability, and bond of joint tape to joint compound. Accessories shall be free of twist or camber of a degree that will prevent their use in the assembly for which they are intended. Edges of accessories shall be free of burrs and sharp edges.
Scope
1.1 This specification covers accessories used in conjunction with assemblies of gypsum wallboard and gypsum veneer base to protect edges and corners and to provide architectural features (see Fig. 1).
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.