Standard
Historical
Last Updated: Aug 16, 2017
Track Document
ASTM C169-92(2000)
Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass
Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass
C0169-92R00
ASTM|C0169-92R00|en-US
Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass
Standard
C169 Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass>
new
BOS Vol. 15.02 Committee C14
$
125.00
In stock
Scope
1.1 These test methods cover the quantitative chemical analysis of soda-lime and borosilicate glass compositions for both referee and routine analysis. This would be for the usual constituents present in glasses of the following types: (1) soda-lime silicate glass, (2) soda-lime fluoride opal glass, and (3) borosilicate glass. The following common oxides, when present in concentrations greater than indicated, are known to interfere with some of the determinations in this method: 2 % barium oxide (BaO), 0.2 % phosphorous pentoxide (P2O5), 0.05 % zinc oxide (ZnO), 0.05 % antimony oxide (Sb2O3), 0.05 % lead oxide (PbO).
1.2 The analytical procedures, divided into two general groups, those for referee analysis, and those for routine analysis, appear in the following order:
| Sections | |
| Procedures for Referee Analysis: | |
| Silica | 10 |
| BaO, R | 11-15 |
| Fe2O3, TiO2, ZrO2 by Photometry and Al2O3 by Complexio-metric Titration | 16-22 |
| Cr2O3 by Volumetric and Photometric Methods | 23-25 |
| MnO by the Periodate Oxidation Method | 26-29 |
| Na2O by the Zinc Uranyl Acetate Method and K2O by the Tetraphenylborate Method | 30-33 |
| SO3 (Total Sulfur) | 34 to 35 |
| As2O3 by Volumetric Method | 36-40 |
| Procedures for Routine Analysis: | |
| Silica by the Single Dehydration Method | 42-44 |
| Al2O3, CaO, and MgO by Complexiometric Titration, and BaO, Na2O, and K2O by Gravimetric Method | 45-51 |
| BaO, Al2O3, CaO, and MgO by Atomic Absorption; and Na2O and K 2O by Flame Emission Spectroscopy | 52-59 |
| SO3 (Total Sulfur) | 60 |
| B2O3 | 61 to 62 |
| Fluorine by Pyrohydrolysis Separation and Specific Ion Electrode Measurement | 63-66 |
| P2O5 by the Molybdo-Vanadate Method | 67-70 |
| Colorimetric Determination of Ferrous Iron Using 1,10 Phenanthroline | 71-76 |
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.