Standard
Historical
Last Updated: Feb 08, 2016
Track Document
ASTM A911/A911M-11
Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties
Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties
A0911_A0911M-11
ASTM|A0911_A0911M-11|en-US
Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties
Standard
A911/A911M Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties>
new
BOS Vol. 01.04 Committee A01
$
77.00
In stock
Abstract
This specification covers uncoated, stress-relieved steel bars for prestressed concrete railroad ties. Analysis of the steel shall conform to the chemical requirements specified by the specification. Mechanical requirements including test method, tensile strength, yield strength, elongation and wrapping test are provided. One test specimen each for the tensile test and the wrapping test shall be taken for every 10 coils or fraction thereof in a lot.
Scope
1.1 This specification covers uncoated stress-relieved steel bars for use in prestressed concrete railroad ties.
1.2 A supplementary requirement (S1) is provided for use where low-relaxation bars and relaxation testing for that product is required by the purchaser. The supplementary requirement applies only when specified in the purchase order or contract.
1.3 This specification is applicable for orders in either inch-pounds units (as Specification A911) or in SI units (as Specification A911M).
1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standards. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.