Standard
Historical
Last Updated: Aug 16, 2017
Track Document
ASTM A790/A790M-01
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
A0790_A0790M-01
ASTM|A0790_A0790M-01|en-US
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
Standard
A790/A790M Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe>
new
BOS Vol. 01.01 Committee A01
$
86.00
In stock
Scope
1.1 This specification covers seamless and straight-seam welded ferritic/austenitic steel pipe intended for general corrosive service, with particular emphasis on resistance to stress corrosion cracking. These steels are susceptible to embrittlement if used for prolonged periods at elevated temperatures.
1.2 Optional supplementary requirements are provided for pipe where a greater degree of testing is desired. These supplementary requirements call for additional tests to be made and, when desired, one or more of these may be specified in the order.
1.3 Appendix X1 of this specification lists the dimensions of welded and seamless stainless steel pipe as shown in ANSI B36.19. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of this specification.
1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the M designation of this specification is specified in the order.
Note 1--The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as "nominal diameter," "size," and "nominal size."