Standard
Historical
Last Updated: Aug 27, 2014
Track Document
ASTM A586-04a(2009)e1
Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand
Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand
A0586-04AR09E01
ASTM|A0586-04AR09E01|en-US
Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand
Standard
A586 Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand>
new
BOS Vol. 01.06 Committee A05
$
86.00
In stock
Abstract
This specification covers zinc-coated parallel and helical steel wire structural strands for use where a high-strength, high-modulus, multiple-wire tension member is desired as a component part of a structure. Breaking strength is expressed as Grade 1 or 2, while, coating weight is expressed as Class A, B, or C. Strands shall be furnished with Class A weight zinc-coated wires throughout, but may be furnished with Class B or C weight wires as well where additional corrosion protection is required. The base metal shall be carbon steel manufactured by the open-hearth, basic-oxygen, or electric-furnace process Finished strands and the hard-drawn individual zinc-coated wires shall be coated by the hot-dip or electrolytic process. Specimens shall be tested and conform to values of the following physical requirements: nominal diameter, stress at specified extension under load, tensile strength, total elongation, ductility, and coating weight and adherence.
Scope
1.1 This specification covers zinc-coated steel wire structural strand, for use where a high-strength, high-modulus, multiple-wire tension member is desired as a component part of a structure. The strand is available with parallel or helical wire construction.
1.1.1 The strand is available with several zinc coating classes and with two strength grades, as described in Section 4.
1.2 The strand is furnished with Class A weight zinc-coated wires throughout. It can be furnished with Class B weight or Class C weight zinc-coated outer wires where additional corrosion protection is required.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.