Standard
Historical
Last Updated: Mar 07, 2018
Track Document
ASTM A551/A551M-08(2013)
Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications
Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications
A0551_A0551M-08R13
ASTM|A0551_A0551M-08R13|en-US
Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications
Standard
A551/A551M Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications>
new
BOS Vol. 01.05 Committee A01
$
77.00
In stock
Abstract
This specification details the standard requirements for carbon steel tires for railway and rapid transit applications. The seven classes of steel tires covered here are: Class A-untreated driving tires for locomotives in passenger service; Class AHT-heat-treated driving tires for locomotives in passenger service; Class B-untreated driving tires for freight locomotives and tires for locomotive-truck, tender-truck, trailer and car wheels and miscellaneous service; Class BHT-heat-treated driving tires for freight locomotives and tires for trailer service; Class C-untreated tires for switching locomotives; Class CHT-heat-treated driving tires and switching locomotives and tires for locomotive-trucks, tender-trucks, trailer and car wheels, and miscellaneous service; and Class DHT-heat-treated driving tires for locomotives with light braking conditions, heavily loaded trailer tires, and rapid transit wheels where off-tread brakes are employed. Tires shall be tested and conform to required chemical composition and Brinell hardness values. Reheat treatment and retests may be done if any of the tires fail to meet the specified property values.
Scope
1.1 This specification covers seven classes of carbon steel tires for railway and rapid transit use.
1.1.3 Class B—For untreated driving tires for freight locomotives and tires for locomotive-truck, tender-truck, trailer and car wheels, and miscellaneous service.
1.1.4 Class BHT—For heat-treated driving tires for freight locomotives and tires for trailer wheels.
1.2 Supplementary requirements, including those in the general requirements of Specification A788/A788M, are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order.
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text and tables the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.