Standard
Historical
Last Updated: Aug 16, 2017
Track Document
ASTM A529/A529M-01
Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
A0529_A0529M-01
ASTM|A0529_A0529M-01|en-US
Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
Standard
A529/A529M Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality>
new
BOS Vol. 01.04 Committee A01
$
77.00
In stock
Scope
1.1 This specification covers carbon-manganese steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded construction of buildings and for general structural purposes.
1.2 Material under this specification is available in two grades:
| Grade | Yield Strength,ksi [MPa] | Thickness |
| 50 [345] | 50 [345] | Plates to 1 in. [25 mm] thick to 12 in. [305 mm] wide |
| Bars to 3 1/2 in. [90 mm] | ||
| Shapes-Groups 1 & 2 | ||
| 55 [380] | 55 [380] | Plates to 1 in. [25 mm] thick to 12 in. [305 mm] wide |
| Bars to 3 in. [75 mm] | ||
| Shapes-Groups 1 & 2 |
1.3 When the steel is to be welded, it is presupposed that a welding procedure suitable for the grade of steel and intended use or service will be utilized. See Appendix X3 of Specification A6/A6M for information on weldability.
1.4 The values stated in either inch-pound units or SI units are to be regarded as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other.