Durability of Building and Construction Sealants and Adhesives: 4th Volume

STP Published: 2012

STP1545-EB

Durability of Building and Construction Sealants and Adhesives: 4th Volume

Editor(s): A.T. Wolf

Twenty-five peer-reviewed papers provide the latest scientific research in the building and construction industry for all aspects of sealant and adhesive durability.

Topics include:

Laboratory Testing and Specialized Outdoor Exposure Testing—characterization of adhesive joints for hybrid steel-glass beams; in situ measurement of compression set in building sealants during outdoor aging; adhesive joints in glass and solar engineering; and more.

Factors Influencing the Durability of Sealed Joints and Adhesive Fixing—durability of cold-bent insulating glass units; adhesion of elastomeric silicone sealants to polymeric substrates; mechanical characteristics of degraded silicone bonded point supports; glass unit corner loading; asphalt blistering on concrete bridges; interfacial durability of silicone adhesives in building applications.

Development of New Test Methods and Performance-Based Specifications—quantification of surface degradation and evaluation of outdoor and accelerated exposure of construction sealants; introduction to ASTM C1736; sealed joint performance for selection of sealants suitable for autoclaved lightweight concrete panels; testing approach for structural glazing; and modulus changes during durability tests on building joint sealants.

Field Experience with Sealed Joints and Adhesive Fixing—moisture sensitive adhesives and flooring adhesive failures and case studies of adhesive and rigid insulation board failures due to moisture in low sloped roofing assemblies.

Performance under Seismic Loads—seismic racking test evaluation of silicone; evaluation of structural sealant in four-sided structural sealant glazing curtain wall system; and review of structural silicone glazing systems subjected to a mega-earthquake.

A Panel Discussion: ASTM Introduces C1736 Standard Practice for Non-Destructive Evaluation of Adhesion of Installed Weatherproofing Sealant Joints Using a Rolling Device Free

Andreas T. Wolf

Bond Strength Between Cast-in-Place Ultra-High-Performance- Concrete and Glass Fibre Reinforced Polymer Plates Using Epoxy Bonded Coarse Silica Sand

Donna Chen, Raafat El-Hacha

Characterization of Adhesive Joints for Hybrid Steel-Glass Beams by Means of Simplified Small Scale Tests

M. Feldmann, B. Abeln, E. Preckwinkel

Durability of Acrylic Sealants Applied to Joints of Autoclaved Lightweight Concrete Walls: Evaluation of Exposure Testing

Hiroyuki Miyauchi, Michael A. Lacasse, Noriyoshi Enomoto, Shigeki Murata, Kyoji Tanaka

In Situ Measurement of Compression Set in Building Sealants During Outdoor Aging

Gregory T. Schueneman, Christopher G. Hunt, Steven Lacher, Christopher C. White, Donald L. Hunston

Preliminary Evaluation of the Mechanical Properties and Durability of Transparent Structural Silicone Adhesive (TSSA) for Point Fixing in Glazing

Sigurd Sitte, Michael J. Brasseur, Lawrence D. Carbary, Andreas T. Wolf

Adhesive Joints in Glass and Solar Engineering

Bernhard Weller, Iris Vogt

Outline of Testing and Evaluation Program Used in Selection of Adhesives for Transparent Adhesive Joints in All-Glass Load-Bearing Structures

Bernhard Weller, Felix Nicklisch, Volker Prautzsch, Iris Vogt

A Systematic Approach to the Study of Accelerated Weathering of Building Joint Sealants

Christopher C. White, Donald L. Hunston, Kar Tean Tan, James J. Filliben, Adam L. Pintar, Greg Schueneman

Durability of Cold-Bent Insulating-Glass Units

Keith Besserud, Matt Bergers, Andrew J. Black, Lawrence Donald Carbary, Arkadiusz Mazurek, Donald Misson, Kenneth Rubis

The Mechanism of Adhesion Improvement of Elastomeric Silicone Sealants to Difficult-to-Bond Polymeric Substrates through Reactive or Interpenetrating Molecular Brushes

W. (Voytek) S. Gutowski, Gary Toikka, Sheng Li

Mechanical Characteristics of Degraded Silicone Bonded Point Supports

Anneliese Hagl

Glass Unit Corner Loading—Key Parameter in Durability

Anneliese Hagl, Oliver Dieterich

Mechanisms of Asphalt Blistering on Concrete Bridges

Biruk W. Hailesilassie, Manfred N. Partl

Ways of Improving the Interfacial Durability of Silicone Adhesives in Building Applications

P. Vandereecken, I. Maton

Attempt at Quantification of Surface Degradation and Evaluation of Relationship between Outdoor and Accelerated Exposure of Construction Sealants

Noriyoshi Enomoto, Akihiko Ito, Kyoji Tanaka

Development of a Non-Destructive Evaluation Practice of Installed Weatherproofing Sealant Joints Using a Rolling Device—An Introduction to ASTM C 1736

Daniel N. Huff

Weathering Evaluation of Structural Silicone Sealants Used in Korea

Jinyoung Jung, Kendo Hahn, Hyoungwook Lee

Evaluation of Sealed Joint Performance for the Selection of Sealants Suitable for Use in Autoclaved Lightweight Concrete Panels

Hiroyuki Miyauchi, Michael A. Lacasse, Shigeki Murata, Noriyoshi Enomoto, Kyoji Tanaka

Potential of Dynamic-Mechanical Analysis Toward a Complementary Material and System Testing Approach for Structural Glazing

Christoph Recknagel

A Test Method for Monitoring Modulus Changes during Durability Tests on Building Joint Sealants

Christopher C. White, Donald L. Hunston, Kar Tean Tan

Moisture Sensitive Adhesives and Flooring Adhesive Failures

Peter E. Nelson, Emily R. Hopps

Case Studies of Adhesive and Rigid Insulation Board Failures due to Moisture in Low Sloped Roofing Assemblies

David Straup Slick, Nicholas A. Piteo, Dean A. Rutila

Seismic Racking Test Evaluation of Silicone Used in a Four-Sided Structural Sealant Glazed Curtain Wall System

K. A. Broker, S. Fisher, A. M. Memari

Evaluation of the Structural Sealant for Use in a Four-Sided Structural Sealant Glazing Curtain-Wall System for a Hospital Building

A. M. Memari, S. Fisher, C. Krumenacker, K. A. Broker, R. -U. Modrich

A Review of the Behavior of Structural Silicone Glazing Systems Subjected to a Mega-Earthquake

Errol Bull, Jorge Cholaky

Author and Subject Index Free

Subject Index Free

Shipping & Handling

Domestic Shipping

Domestic orders are delivered via United Parcel Service (UPS) or United States Postal Service (USPS). Transit times average 3 to 5 business days. Please be aware that UPS will not deliver packages to Post Office Boxes.

Domestic Rush Orders

Please Contact Us.

International Standard Shipping

International orders are delivered via courier post services which can be either a postal service, courier service, or a combination of both. Standard Service is untraceable. Please allow 4-7 weeks for delivery.

International Expedited Shipping

Please Contact Us.

Please be aware that carriers will not deliver packages to Post Office Boxes. Because of the variability of customs processes and procedures in different countries, ASTM International cannot guarantee transit times to international destinations. Customs duty and taxes are the responsibility of the consignee.

Shipping & Handling charges follow the rate schedule, below:

Order Total	Shipping & Handling Fee (US Domestic)
Up to $50.00	$18.72
$50.01 to $100.00	$20.80
$100.01 to $150.00	$29.52
$150.01 to $250.00	$39.09
$250.01 to $500.00	$56.25
$500.01 to $750.00	$76.42
$750.01 to $1000.00	$93.15
$1000.01 to $1500.00	$121.27
$1500.01 to $2500.00	$158.38
$2500.01 to $4999.00	$209.04
$5000.00 to higher	FREE

Order Total	Shipping & Handling Fee (International)
Up to $50.00	$68.72
$50.01 to $100.00	$70.80
$100.01 to $150.00	$79.52
$150.01 to $250.00	$89.09
$250.01 to $500.00	$106.25
$500.01 to $750.00	$126.42
$750.01 to $1000.00	$143.15
$1000.01 to $1500.00	$171.27
$1500.01 to $2500.00	$208.38
$2500.01 to $4999.00	$259.04
$5000.00 to higher	FREE

Shipping and Handling charges are approximate. Additional charges may be incurred if your order requires multiple shipments. This does not apply to complete sets and sections.

ASTM License Agreement

Reprints and Permissions

Reprints and copyright permissions can be requested through the
Copyright Clearance Center

Details

Developed by Committee: C24

Pages: 608

DOI: 10.1520/STP1545-EB

ISBN-EB: 978-0-8031-7531-0

ISBN-13: 978-0-8031-7557-0