In the Accelerator Production of Tritium Program, thermalized neutrons produced from multiplication and moderation of spallation neutrons will be absorbed in 3He gas to produce tritium. The spallation neutrons will be generated by the interaction of high energy (∼1 GeV) protons with solid tungsten rods. An unavoidable byproduct of the spallation reactions is large amounts of helium and hydrogen gas generated in the rods. The release kinetics of these gases during various proposed off-normal scenarios involving loss of coolant and afterheat-induced rises in temperature are of particular interest. In addition, the magnitude of the gas generation cross sections and the fractional retention of these gases is necessary for extrapolation of these data to higher exposures.
Tungsten rods irradiated with 800 MeV protons in the Los Alamos Neutron Science Center (LANCE) to rather high exposures have been sectioned to produce small specimens suitable for measurement of both helium and hydrogen. Hydrogen evolution was measured both by dropping the specimen into a small ceramic crucible at 1200°C and also by subjecting the specimen to a simulated temperature ramp from ∼200 to ∼1200°C, as has been calculated to be induced by loss of cooling and subsequent afterheat in an APT plant. The latter technique showed four distinct hydrogen release peaks at temperatures of approximately 500, 800, 1000 and 1200°C, suggesting a variety of trapping sites with different binding energies. Helium release and total content were easured by subjecting the specimens to the same temperature excursion, followed later by melting to release the remaining helium. Approximately 99% of the helium was retained until melting occurred. For both gases, release measurements were conducted using mass spectrometric techniques.
The measured amounts of helium agreed well with predictions. The hydrogen measurements were somewhat lower than predicted. This may reflect diffusional losses from the rods or some needed modifications in the evaporation model employed in the LAHET code.
Author Information
Oliver, BM
Pacific Northwest National Laboratory, Richland, Washington, USA
Garner, FA
Pacific Northwest National Laboratory, Richland, Washington, USA
Hamilton, ML
Pacific Northwest National Laboratory, Richland, Washington, USA
Sommer, WF
Los Alamos National Laboratory, Los Alamos, NM, USA
Maloy, SA
Los Alamos National Laboratory, Los Alamos, NM, USA
Ferguson, PD
Los Alamos National Laboratory, Los Alamos, NM, USA
James, MR
Los Alamos National Laboratory, Los Alamos, NM, USA
Domestic orders are delivered via United Parcel Service (UPS) or United States Postal Service (USPS). Transit
times average 3 to 5 business days. Please be aware that UPS will not deliver packages to Post Office Boxes.
International orders are delivered via courier post services which can be either a postal service, courier
service, or a combination of both. Standard Service is untraceable. Please allow 4-7 weeks for delivery.
Please be aware that carriers will not deliver packages to Post Office Boxes. Because of the variability of
customs processes and procedures in different countries, ASTM International cannot guarantee transit times to
international destinations. Customs duty and taxes are the responsibility of the consignee.
Shipping & Handling charges follow the rate schedule, below:
Order Total
Shipping & Handling Fee (US Domestic)
Up to $50.00
$18.72
$50.01 to $100.00
$20.80
$100.01 to $150.00
$29.52
$150.01 to $250.00
$39.09
$250.01 to $500.00
$56.25
$500.01 to $750.00
$76.42
$750.01 to $1000.00
$93.15
$1000.01 to $1500.00
$121.27
$1500.01 to $2500.00
$158.38
$2500.01 to $4999.00
$209.04
$5000.00 to higher
FREE
Order Total
Shipping & Handling Fee (International)
Up to $50.00
$68.72
$50.01 to $100.00
$70.80
$100.01 to $150.00
$79.52
$150.01 to $250.00
$89.09
$250.01 to $500.00
$106.25
$500.01 to $750.00
$126.42
$750.01 to $1000.00
$143.15
$1000.01 to $1500.00
$171.27
$1500.01 to $2500.00
$208.38
$2500.01 to $4999.00
$259.04
$5000.00 to higher
FREE
Shipping and Handling charges are approximate. Additional charges may be incurred if your order requires multiple shipments. This does not apply to complete sets and sections.
