ASTM Volume 05.01, February 2026
D1403-20b Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment
D3336-20b Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
D3603-20 Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)
D1092-20 Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
D3829-20a Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
D2625-20 Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)
D2511-20 Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants
D2421-21e1 Standard Practice for Interconversion of Analysis of C
D1480-21 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
D2619-21 Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)
D2162-21 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards
D2598-21 Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
D2158-21 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
D3230-19 Standard Test Method for Salts in Crude Oil (Electrometric Method)
D130-19 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
D323-20a Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
D2274-14(2019) Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
D1838-21 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
D3828-16a(2021) Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
D2509-20ae1 Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)
D2392-15(2021) Standard Test Method for Color of Dyed Aviation Gasolines
D1478-20 Standard Test Method for Low-Temperature Torque of Ball Bearing Grease
D2596-20 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
D2269-10(2020) Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
D2764-20 Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch
D2649-20a Standard Test Method for Corrosion Characteristics of Solid Film Lubricants
D2650-10(2021) Standard Test Method for Chemical Composition of Gases by Mass Spectrometry
D1217-20 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
D3712-18 Standard Test Method of Analysis of Oil-Soluble Sulfonates by Liquid Chromatography
D4051-10(2021) Standard Practice for Preparation of Low-Pressure Gas Blends
D2710-20 Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration
D1747-09(2019) Standard Test Method for Refractive Index of Viscous Materials
D4055-04(2019) Standard Test Method for Pentane Insolubles by Membrane Filtration
D2603-20 Standard Test Method for Sonic Shear Stability of Polymer-Containing Oils
D2319/D2319M-20 Standard Test Method for Softening Point of Pitch (Cube-in-Air Method)
D2782-20 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)
D1218-21 Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids
D3339-21 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
D2896-21 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
D1401-21 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
D217-21a Standard Test Methods for Cone Penetration of Lubricating Grease
D3700-21 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
D1831-21 Standard Test Method for Roll Stability of Lubricating Grease
D2878-21 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
D4056-21 Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants
D2265-22 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
D4052-22 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
D2272-22 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
D1743-22 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
D4057-22 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
D473-22 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
D56-22 Standard Test Method for Flash Point by Tag Closed Cup Tester
D1835-22 Standard Specification for Liquefied Petroleum (LP) Gases
D4171-22 Standard Specification for Fuel System Icing Inhibitors
D2320-98(2022)e1 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
D873-22 Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)
D2709-22 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
D4048-22 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
D2276-22 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
D3605-22 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
D3228-22 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
D3948-22 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
D3237-22 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
D3831-22 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
D3342-22 Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water
D3343-22 Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels
D2711-22 Standard Test Method for Demulsibility Characteristics of Lubricating Oils
D97-17b(2022) Standard Test Method for Pour Point of Petroleum Products
D1796-22 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
D4006-22 Standard Test Method for Water in Crude Oil by Distillation
D4007-22 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
D2532-22 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
D3238-22a Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
D2595-22 Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range
D2510-22 Standard Test Method for Adhesion of Solid Film Lubricants
D974-22 Standard Test Method for Acid and Base Number by Color-Indicator Titration
D287-22 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer/Method)
D976-21e1 Standard Test Method for Calculated Cetane Index of Distillate Fuels
D2500-23 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
D2549-23 Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography
D2420-23 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
D2712-23 Standard Test Method for Determination of Hydrocarbon Impurities in High Purity Propylene by Gas Chromatography
D1267-23 Standard Test Method for Gauge Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)
D1657-22e1 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
D874-23 Standard Test Method for Sulfated Ash from Lubricating Oils and Additives
D2163-23e1 Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
D2880-23 Standard Specification for Gas Turbine Fuel Oils
D1552-23 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
D3527-23 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
D611-23 Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
D2008-23 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
D1318-23 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)
D2426-23 Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography
D2593-23 Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography
D1025-23 Standard Test Method for Nonvolatile Residue of Polymerization-Grade Butadiene
D1157-23 Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons
D2384-23 Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures
D1093-23 Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues
D3764-23 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
D4174-23 Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems
D2266-23 Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)
D156-23 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
D2962-23 Standard Practice for Calculating Volume-Temperature Correction For Coal-Tar Pitches
D4072-23 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
D1159-23 Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration
D2890-23 Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels
D3701-23 Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry
D2983-23 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
D3242-23 Standard Test Method for Acidity in Aviation Turbine Fuel
D2879-23 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
D2425-23 Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry
D1265-23a Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method
D910-24 Standard Specification for Leaded Aviation Gasolines
D1094-24 Standard Test Method for Water Reaction of Aviation Fuels
D4042-24 Standard Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils
D3227-24 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
D1500-24 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
D3241-24 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
D2156-09(2024) Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
D2007-19(2024)e1 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
D445-24 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
D189-24 Standard Test Method for Conradson Carbon Residue of Petroleum Products
D71-24 Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)
D1662-24 Standard Test Method for Active Sulfur in Cutting Oils
D2270-24 Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 °C and 100 °C
D664-24 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
D2422-24 Standard Classification of Industrial Fluid Lubricants by Viscosity System
D2893-24 Standard Test Methods for Oxidation Characteristics of Extreme-Pressure Lubrication Oils
D1160-24 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
D3703-18(2024) Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels
D1840-24 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
D2502-24 Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements
D2713-24 Standard Test Method for Dryness of Propane (Valve Freeze Method)
D2070-24a Standard Test Method for Thermal Stability of Hydraulic Oils
D2501-24 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
D2889-24 Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels
C1234-24 Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
D128-24a Standard Test Methods for Analysis of Lubricating Grease
D2155-18(2024) Standard Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature
D95-23e1 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
D2638-24 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
D86-23ae2 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
D91-24 Standard Test Method for Precipitation Number of Lubricating Oils
D446-24 Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers
D565-24 Standard Test Method for Carbonizable Substances in White Mineral Oil
D1748-24 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
D2982-24 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
D92-24 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
D972-24 Standard Test Method for Evaporation Loss of Lubricating Greases and Oils
D1742-24 Standard Test Method for Oil Separation from Lubricating Grease During Storage
D3704-24 Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion
D4170-24 Standard Test Method for Fretting Wear Protection by Lubricating Greases
D61-24 Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)
D3233-24 Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)
D4175-24e1 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
D2714-24 Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
D3702-24 Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine
D2981-24 Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion
D2887-24 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
D2622-24a Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
D2157-24 Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels
D3244-24 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
D1264-24a Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
D3606-24a Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography
D1321-24a Standard Test Method for Needle Penetration of Petroleum Waxes
D2068-24a Standard Test Method for Determining Filter Blocking Tendency
D892-25 Standard Test Method for Foaming Characteristics of Lubricating Oils
D2624-24 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
D2892-25 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
D381-25 Standard Test Method for Gum Content in Fuels by Jet Evaporation
D93-25 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
D187-25 Standard Test Method for Burning Quality of Kerosene
D3699-25 Standard Specification for Kerosine
D612-25 Standard Test Method for Carbonizable Substances in Paraffin Wax
D1298-24 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
D721-25 Standard Test Method for Oil Content of Petroleum Waxes
D938-25 Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum
D1322-25 Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel
D3231-25 Standard Test Method for Phosphorus in Gasoline
D4176-22e1 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
D4049-25 Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray
D94-25 Standard Test Methods for Saponification Number of Petroleum Products
D4045-25 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
D1550-25 Standard ASTM Butadiene Measurement Tables
D3104-25 Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)
D3461-25 Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)
D665-25 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
D2669-25 Standard Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts)
D2318-25 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch
D2415-25 Standard Test Method for Ash in Coal Tar and Pitch
D2416-25 Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)
D524-15(2025)e1 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
D4047-25 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method
D396-25 Standard Specification for Fuel Oils
D87-25 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
D127-25 Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum
D3120-25 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
D1833-25 Standard Test Method for Odor of Petroleum Wax
D937-25 Standard Test Method for Cone Penetration of Petrolatum
D3240-25 Standard Test Method for Undissolved Water In Aviation Turbine Fuels
D482-25 Standard Test Method for Ash from Petroleum Products
D3427-19(2025) Standard Test Method for Air Release Properties of Hydrocarbon Based Oils
D2268-21(2025) Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography
D893-25 Standard Test Method for Insolubles in Used Lubricating Oils
D943-25 Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils
D240-25 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
D3705-25 Standard Test Method for Misting Properties of Lubricating Fluids
D3944-25 Standard Test Method for Solidification Point of Petroleum Wax
D3338/D3338M-25 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
D2386-25a Standard Test Method for Freezing Point of Aviation Fuels
D1404/D1404M-99(2025) Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease
D2881-19(2025) Standard Classification for Metalworking Fluids and Related Materials
D4054-25a Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives
D942-25a Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method
D2670-25 Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)
D2783-25 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
D4172-25 Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)
D1655-25a Standard Specification for Aviation Turbine Fuels
D341-20(2025) Standard Practice for Viscosity-Temperature Equations and Charts for Liquid Petroleum or Hydrocarbon Products
D525-12a(2025) Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)
D1319-25 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
D2161-20(2025) Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
D1250-25 Standard Guide for the Use of the Joint API and ASTM Adjunct for Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils: API MPMS Chapter 11.1
D975-26a Standard Specification for Diesel Fuel