E2121-21 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings

E865-20 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels

E1555-20 Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair

E1556-20 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair

E241-20 Standard Guide for Limiting Water-Induced Damage to Buildings

E283/E283M-19 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Skylights, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

E1730-19 Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores

E1886-19 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials

E1801-21 Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters

E1800-21 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160 °F Elevated Humidity Service), Type I Panels

E1851-21 Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures

E1091-21 Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels

E990-21 Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels

E997-15(2021) Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing

E1481-00a(2021) Standard Terminology of Railing Systems and Rails for Buildings

E1233/E1233M-14(2021) Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential

E1423-21 Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems

E1602-03(2017) Standard Guide for Construction of Solid Fuel Burning Masonry Heaters

E1748-95(2017) Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System

E1592-05(2017) Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference

E935-21 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings

E529-04(2018) Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction

E196-06(2018) Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs

E575-05(2018) Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies

E564-06(2018) Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings

E405-04(2018) Standard Test Methods for Wear Testing Rotary Operators for Windows

E1925-18 Specification for Engineering and Design Criteria for Rigid Wall Relocatable Structures

E779-19 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization

E455-19 Standard Test Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings

E1793-19 Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters

E1976-19 Standard Specification for Shelter, Tactical, Nonexpandable

E874-19 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels

E2126-19 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings

E998-19 Standard Test Method for Structural Performance of Architectural Glass Products Under the Influence of Uniform Static Loads

E1692-95a(2018) Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants

E1693-95(2018) Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets

E1701-95(2018) Standard Classification for Serviceability of an Office Facility for Manageability

E1661-95a(2018) Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness

E1660-95a(2018) Standard Classification for Serviceability of an Office Facility for Support for Office Work

E1664-19 Standard Classification for Serviceability of an Office Facility for Layout and Building Factors

E1662-95a(2018) Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment

E1665-95a(2018) Standard Classification for Serviceability of an Office Facility for Facility Protection

E1668-95a(2018) Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff

E1667-95a(2018) Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants

E1666-95a(2018) Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions

E1670-95a(2018) Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance

E1669-95a(2018) Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding

E1679-13(2019) Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed

E1671-95a(2018) Standard Classification for Serviceability of an Office Facility for Cleanliness

E73-13(2021) Standard Practice for Static Load Testing of Truss Assemblies

E964-15(2020)e1 Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems

E1074-15(2020)e1 Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems

E1057-15(2020)e1 Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems

E783-02(2018) Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors

E1185-15(2020)e1 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems

E1121-15(2020)e1 Standard Practice for Measuring Payback for Investments in Buildings and Building Systems

E1369-15(2020)e1 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems

E1993/E1993M-98(2020) Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs

E546-14(2020) Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units

E576-14(2020) Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position

E330/E330M-14(2021) Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference

E1699-14(2020) Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes

E864-20 Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels

E2128-20 Standard Guide for Evaluating Water Leakage of Building Walls

E2013-20 Standard Practice for Developing Functions, Constructing FAST Diagrams, and Performing Function Analysis During Value Engineering (VE)/Value Analysis (VA) Study

E833-14(2021) Standard Terminology of Building Economics

E1857-97(2021) Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces

E2141-21 Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units

E1190-21 Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members

E1480-92(2022) Standard Terminology of Facility Management (Building-Related)

E488/E488M-22 Standard Test Methods for Strength of Anchors in Concrete Elements

E2127-01a(2022) Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction

E1680-16(2022) Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems

E1803-14(2022) Standard Test Methods for Determining Strength Capacities of Structural Insulated Panels

E1794-22a Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200 °F Elevated Humidity Service), Type II Panels

E1975-22 Standard Specification for Shelter, Electrical, Equipment S-280/G

E1509-22 Standard Specification for Room Heaters, Pellet Fuel-Burning Type

E754-80(2022) Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints

E1399/E1399M-97(2022) Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems

E1486-14(2022) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria

E1486M-14(2022) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria (Metric)

E1612/E1612M-94(2022) Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures

E2068-00(2022) Standard Test Method for Determination of Operating Force of Sliding Windows and Doors

E1186-22 Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems

E1424-22 Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Skylights, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen

E72-22 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction

E661-22 Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads

E695-22 Standard Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading

E1827-22 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door

E1663-22 Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology

E1694-22 Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies

E331-00(2023) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference

E1105-15(2023) Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference

E1425-14(2023) Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems

E736/E736M-19(2023) Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members

E759/E759M-92(2023) Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members

E2112-23 Standard Practice for Installation of Exterior Windows, Doors and Skylights

E859/E859M-23 Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members

E1745-17(2023) Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs

E1765-16(2023) Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Projects, Products, and Processes

E1804-16(2023) Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project

E1946-18(2023) Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects

E2166-16(2023) Standard Practice for Organizing and Managing Building Data

E605/E605M-19(2023) Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members

E760/E760M-92(2023) Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members

E761/E761M-92(2023) Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members

E937/E937M-93(2023) Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members

E1513/E1513M-93(2023) Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)

E2099-23 Standard Practice for Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems

E866-23 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels

E1826-23 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels

E894-23 Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings

E917-17(2023) Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems

E2140-01(2023) Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head

E1258-23 Standard Test Method for Airflow Calibration of Fan Pressurization Devices

E1677-23 Standard Specification for Air Barrier (AB) Material or Assemblies for Low-Rise Framed Building Walls

E1996-23 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes

E1554/E1554M-13(2023) Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization

E1512-01(2023) Standard Test Methods for Testing Bond Performance of Bonded Anchors

E1514-98(2023)e1 Standard Specification for Structural Standing Seam Steel Roof Panel Systems

E1783/E1783M-24 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures

E1300-24 Standard Practice for Determining Load Resistance of Glass in Buildings

E1155/E1155M-23 Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers

E985-24 Standard Specification for Permanent Metal Railing Systems and Rails for Buildings

E631-15(2024) Standard Terminology of Building Constructions

E2103/E2103M-19(2024) Standard Classification for Bridge Elements—UNIFORMAT II

E1643-24 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs

E2026-24 Standard Guide for Seismic Risk Assessment of Buildings

E1557-09(2024) Standard Classification for Building Elements and Related Sitework—UNIFORMAT II

E2150-17(2024) Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure

E741-24 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution

E1978-24 Standard Specification for Shelter, Tactical, Expandable, Two-Side

E1977-24 Standard Specification for Shelter, Tactical, Expandable, One-Side

E987-88(2024) Standard Test Methods for Deglazing Force of Fenestration Products

E1646-95(2024) Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference

E2004-18(2024) Standard Test Method for Facing Cleavage of Sandwich Panels

E1825-24 Standard Guide for Evaluation of Building Exterior Enclosure Materials, Products, and Systems

E2083-24 Standard Classification for Building Construction Field Requirements, and Office Overhead & Profit

E547-00(2024) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference

E154/E154M-08a(2025) Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover

E1307-18(2025) Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels

E1749-18(2025) Standard Terminology Relating to Rigid Wall Relocatable Shelters

E1773-18(2025) Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants

E1998-25 Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances

E2098/E2098M-25 Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage Systems, after Exposure to a Sodium Hydroxide Solution

E2029-25 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution

E1637-98(2025)e1 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems

E1974-19(2025) Standard Specification for Shelter, Electrical Equipment S-250/G

E2110-25 Standard Terminology for Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage

E2134/E2134M-25 Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS) or EIFS with Drainage