Standard Consumer Safety Specification for Safety Instructions and Labeling for Recreational Powered Scooters and Pocket Bikes (Withdrawn 2023)
Standard Consumer Safety Specification for Safety Instructions and Labeling for Recreational Powered Scooters and Pocket Bikes (Withdrawn 2023)F2642-08R15ASTM|F2642-08R15|en-USStandard Consumer Safety Specification for Safety Instructions and Labeling for Recreational Powered Scooters and Pocket Bikes (Withdrawn 2023)StandardF2642 Standard Consumer Safety Specification for Safety Instructions and Labeling for Recreational Powered Scooters and Pocket Bikes (Withdrawn 2023)>newBOS Vol. 15.11 Committee F15
$0.00
Out of stock
ASTM International
Abstract
This consumer safety specification includes requirements for safety instructions and labeling for recreational powered scooters and pocket bikes. Safety instructions shall be included with each unit and shall have the following: age and weight limit of the user, original design and configuration of the unit, operation of the unit, pre-operation checks, demonstration of unit, appropriate clothing and helmet, and maintenance. The maintenance instructions shall include: brake adjustments and service, tire inflation pressures, lubrication points including recommended lubricants, drive system specification and service instructions, frame inspection procedures, capacity by weight, maximum operating speeds, service and adjustment procedures for all components, and a phone number to secure maintenance or operating assistance from the manufacturer. Name and place of the business, manufacturer, importer, distributor, or seller shall be listed in the manual and on the retail box. Warning systems shall be in contrasting colors, permanent, conspicuous, and in sans serif style font.
Scope
1.1 This consumer safety specification includes requirements for safe-use instructions and labeling to minimize the hazards to users of recreational powered scooters and pocket bikes. This specification is intended to cover safety instructions, labeling, and maintenance for products for:
1.1.1 Children age eight to twelve for units limited to speeds 16 km/h (10 miles/h) or less, and
1.1.2 Children age 13 and above for fast-moving units capable of achieving speeds of >16 km/h (>10 miles/h).
1.2 This specification is intended to reduce hazards, other than those inherent to the users of these units during normal intended use and within manufacturers’ safety guidelines.
1.3 This specification is not intended for non powered scooters (Consumer Safety Specification F2264), battery powered ride-on toys (Consumer Safety Specification F963), motorcycles, skateboards, all terrain vehicles (ATVs), go-karts (Practice F2007), fun-karts (Safety Guide F1928), snowmobiles, motorized trail bikes, lawn mowers, or motorized wheelchairs including mobility scooters.
1.4 This specification is not intended for units designed for “Adult Use Only” and that are prominently labeled and marked as such.
1.5 This specification is not intended for units designed or licensed for roadway use or regulated by transportation regulations (that is, Department of Transportation (DOT) or state).
1.6 The values given in SI units are to be considered as the standard. The values given in parentheses are for information only.
1.7This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Language unavailable
Format unavailable
What is a Redline?
Why Redline?
A PDF redline is a quick and easy way to compare all of the changes between the current, active standard and the previous version.
With a redline you'll immediately see:
additions
deletions
and other changes between the two standards.
Save Time and Trouble!With a Redline you no longer have to spend time trying to determine what has changed in the new standard! Redlines save you time and ensure you see what the changes are to the standard.
PriceWhen you select the "Standard + Redline" option you get both documents! Best of all, the cost of a Standard + Redline is only slightly more than buying the Active Standard by itself.
Domestic orders are delivered via United Parcel Service (UPS) or United States Postal Service (USPS). Transit
times average 3 to 5 business days. Please be aware that UPS will not deliver packages to Post Office Boxes.
International orders are delivered via courier post services which can be either a postal service, courier
service, or a combination of both. Standard Service is untraceable. Please allow 4-7 weeks for delivery.
Please be aware that carriers will not deliver packages to Post Office Boxes. Because of the variability of
customs processes and procedures in different countries, ASTM International cannot guarantee transit times to
international destinations. Customs duty and taxes are the responsibility of the consignee.
Shipping & Handling charges follow the rate schedule, below:
Order Total
Shipping & Handling Fee (US Domestic)
Up to $50.00
$18.72
$50.01 to $100.00
$20.80
$100.01 to $150.00
$29.52
$150.01 to $250.00
$39.09
$250.01 to $500.00
$56.25
$500.01 to $750.00
$76.42
$750.01 to $1000.00
$93.15
$1000.01 to $1500.00
$121.27
$1500.01 to $2500.00
$158.38
$2500.01 to $4999.00
$209.04
$5000.00 to higher
FREE
Order Total
Shipping & Handling Fee (International)
Up to $50.00
$68.72
$50.01 to $100.00
$70.80
$100.01 to $150.00
$79.52
$150.01 to $250.00
$89.09
$250.01 to $500.00
$106.25
$500.01 to $750.00
$126.42
$750.01 to $1000.00
$143.15
$1000.01 to $1500.00
$171.27
$1500.01 to $2500.00
$208.38
$2500.01 to $4999.00
$259.04
$5000.00 to higher
FREE
Shipping and Handling charges are approximate. Additional charges may be incurred if your order requires multiple shipments. This does not apply to complete sets and sections.