Standard
Historical
Last Updated: Oct 29, 2025
Track Document
ASTM F2460-19
Standard Practice for Special Requirements for Bumper Boats
Standard Practice for Special Requirements for Bumper Boats
F2460-19
ASTM|F2460-19|en-US
Standard Practice for Special Requirements for Bumper Boats
Standard
F2460 Standard Practice for Special Requirements for Bumper Boats>
new
BOS Vol. 15.07 Committee F24
$
77.00
In stock
ASTM International
Significance and Use
3.1 The purpose of this practice is to delineate information and to establish procedures for the operation of a bumper boat amusement ride.
3.2 The device is a single craft, unattached to other craft or common frame system. It is non-human powered without connection to a common energy source. It is driver controlled with respect to acceleration, speed, and steering.
Scope
1.1 This practice establishes criteria for the design, manufacture, and operations of bumper boats. These are boats used to bump into each other intentionally as directed by drivers as a form of entertainment. Boats are fitted with an inflatable or impact attenuating device to allow for such bumping.
1.2 This practice follows Practices F1193 and F770 as the basic level of safety for bumper boats. These practices shall be followed for all bumper boats under this practice. This practice shall include all modifications, improvements, and deviations to design, quality, manufacture, construction, ownership, operation, inspection, and maintenance of a bumper boat
1.3 This practice does not apply to personal watercraft, human powered watercraft, or watercraft used for general purposes by private owners.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.