Standard
Historical
Last Updated: Dec 31, 2010
Track Document
ASTM F1469-99(2004)
Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing
Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing
F1469-99R04
ASTM|F1469-99R04|en-US
Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing
Standard
F1469 Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing>
new
BOS Vol. 01.09 Committee F16
$
86.00
In stock
Significance and Use
This guide is recommended for the purpose of evaluating test equipment that may be utilized in statistical process control, testing laboratories, and for in-process control of manufacturing operations.
Ask the question: What effect does the operator have on the measurement process? If possible, the operators who normally use the test equipment should be included in the study. If operator calibration of the equipment is likely to be a significant cause of variation, then the operator should recalibrate the equipment prior to each group of readings.
The test equipment should provide direct readings in which the smallest digit is no larger than one tenth of the tolerance of the characteristic being evaluated.
It is recommended that a test equipment repeatability and reproducibility study be a mandatory part of all test equipment purchases and that acceptance criteria be <10 % for certification and statistical process control (SPC) use.
Scope
1.1 This guide describes the steps required to conduct a complete repeatability and reproducibility (RR) study on nondestructive test equipment. This guide is a manual (use of calculator) method. Other methods may utilize the application of computer driven software.
1.2 This guide can be used to evaluate all test equipment that provides variable measuring data.