Standard
Historical
Last Updated: Sep 07, 2020
Track Document
ASTM F375-89(2015)
Standard Specification for Integrated Circuit Lead Frame Material
Standard Specification for Integrated Circuit Lead Frame Material
F0375-89R15
ASTM|F0375-89R15|en-US
Standard Specification for Integrated Circuit Lead Frame Material
Standard
F375 Standard Specification for Integrated Circuit Lead Frame Material>
new
BOS Vol. 10.04 Committee F01
$
77.00
In stock
Abstract
This specification covers the special requirements for a metal strip used in the fabrication of integrated-circuit lead frames by stamping or photochemical milling. The metal strip shall be manufactured from copper and copper alloys, ferrous alloys containing nickel, cobalt, or chromium, nickel and nickel alloys, or other metallic materials and shall conform to the chemical, physical, and mechanical property requirements specified, including the limitation on the severity and number of inclusions, the surface finish, and the coil size. Tests for straightness, flatness, coil set, and grain size shall be performed and shall conform to the requirements specified.
Scope
1.1 This specification covers the special requirements for metal strip to be used to fabricate integrated-circuit lead frames by stamping or photochemical milling.
1.2 The metals that are applicable to these parts include copper and copper alloys, ferrous alloys usually containing nickel or cobalt or chromium, nickel and nickel alloys, and other metallic materials.
1.3 The general chemical, physical, and mechanical property requirements of these materials are covered by other ASTM specifications (specifically Specifications B103/B103M, B122/B122M, B152/B152M, B162, B465, F15, F30, F31, F49 and F68), and these should be consulted for properties and tempers that are different for the different metals. For metals for which no ASTM specification is available, other specifications should be adopted by agreement of the parties concerned.
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.