Standard
Active
Last Updated: May 23, 2025
Track Document
ASTM E2641-09(2025)
Standard Practice for Best Practices for Safe Application of 3D Imaging Technology
Standard Practice for Best Practices for Safe Application of 3D Imaging Technology
E2641-09R25
ASTM|E2641-09R25|en-US
Standard Practice for Best Practices for Safe Application of 3D Imaging Technology
Standard
E2641 Standard Practice for Best Practices for Safe Application of 3D Imaging Technology>
new
BOS Vol. 10.04 Committee E57
$
64.00
In stock
ASTM International
Significance and Use
3.1 The overall purpose of standards is to document and communicate best practices in the successful and consistent application of 3D imaging technology. When executed effectively, this leads to an enhanced project performance. This practice offers a guideline for safe field operational procedures used in the application of 3D imaging technology.
3.2 Applicability—As 3D imaging technology is applied across an ever increasing area of application, a set of uniform standards for their safe application is necessary. This best practice shall serve as a guideline to both operator and end user ensuring that necessary and reasonable precautions have been taken to ensure the safe application of 3D imaging technology.
Scope
1.1 This practice for the safe application of 3D imaging technology will focus primarily on the application of specific technology components common to 3D imaging systems. When appropriate, reference may be made to existing standards written for said technologies.
1.2 Safety standards relevant to specific industry practices where the technology may be applied will not be developed given the very broad potential for application over many industries. However, general mention and recommendations will be made to industry specific safety guidelines relevant to some common applications.
1.3 This practice covers the following topics:
1.3.1 End-user/operator responsibilities,
1.3.2 Safety plan,
1.3.3 Safety awareness,
1.3.4 Safe application of laser technology common to 3D imaging systems, and
1.3.5 References to some applicable government regulations.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.