Standard
Active
Last Updated: Feb 12, 2025
Track Document
ASTM E1560-25
Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
E1560-25
ASTM|E1560-25|en-US
Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
Standard
E1560 Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers>
new
BOS Vol. 15.03 Committee E21
$
72.00
In stock
ASTM International
Significance and Use
5.1 The NVR obtained by this test method is that extractable amount available for release from wipers based on test solvents.
5.2 Evaporation of the solvent at the stated temperature is to quantify the NVR that can be expected to exist at room temperature since the slight difference between room temperature and test temperature has not been shown to result in significant variances.
5.3 This test method may be more aggressive than necessary for the evaluation of wipers that will be restricted to dry use only.
5.4 Several other methods are also used to determine NVR. This test method is not intended to replace test methods used for other applications.
Scope
1.1 This test method covers the determination of solvent extractable nonvolatile residue (NVR) from wipers used in assembly, cleaning, or testing of spacecraft, but not from those used for analytical surface sampling of hardware.
1.2 The NVR of interest is that which can be extracted from cleanroom wipers using a specified solvent that has been selected for its extractive qualities. Alternative solvents may be selected, but since their use may result in different values being generated, they must be identified in the procedure data sheet.
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3.1 Exception—The inch-pound units are included for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.