Standard
Active
Last Updated: Apr 27, 2023
Track Document
ASTM E1277-23
Standard Test Method for Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry
Standard Test Method for Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry
E1277-23
ASTM|E1277-23|en-US
Standard Test Method for Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry
Standard
E1277 Standard Test Method for Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry>
new
BOS Vol. 03.05 Committee E01
$
72.00
In stock
ASTM International
Significance and Use
5.1 This test method for the chemical analysis of metals and alloys is primarily intended to test such materials for compliance with compositional specifications. It is assumed that all those who use this test method will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory.
Scope
1.1 This test method covers the chemical analysis of zinc alloys having chemical compositions within the following limits:
| Element | Composition Range, % |
| Aluminum | 3.0–8.0 |
| Antimony | 0.002 max |
| Cadmium | 0.025 max |
| Cerium | 0.03–0.10 |
| Copper | 0.10 max |
| Iron | 0.10 max |
| Lanthanum | 0.03–0.10 |
| Lead | 0.026 max |
| Magnesium | 0.05 max |
| Silicon | 0.015 max |
| Tin | 0.002 max |
| Titanium | 0.02 max |
| Zirconium | 0.02 max |
1.2 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 Included are procedures for elements in the following composition ranges:
| Element | Composition Range, % |
| Aluminum | 3.0–8.0 |
| Cadmium | 0.0016–0.025 |
| Cerium | 0.005–0.10 |
| Iron | 0.0015–0.10 |
| Lanthanum | 0.009–0.10 |
| Lead | 0.002–0.026 |
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific safety hazards statements are given in Section 8, 11.2, and 13.1.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.