Standard
Historical
Last Updated: Dec 31, 2010
Track Document
ASTM E544-99(2004)
Standard Practices for Referencing Suprathreshold Odor Intensity
Standard Practices for Referencing Suprathreshold Odor Intensity
E0544-99R04
ASTM|E0544-99R04|en-US
Standard Practices for Referencing Suprathreshold Odor Intensity
Standard
E544 Standard Practices for Referencing Suprathreshold Odor Intensity>
new
BOS Vol. 14.03 Committee E18
$
96.00
In stock
Abstract
These practices are designed to outline two preferred procedures for referencing the odor intensities of any odorous material in the suprathreshold region on the ASTM Odor Intensity Referencing Scale. The method by which the reference odorant vapors are to be presented for evaluation by a panel of at least eight independent judgments is specified, but the manner by which the test sample is presented will depend on the nature of the sample, and is not defined herein. The methods, where a geometric progression scale with a ratio of 2 is recommended, are generally done by comparing the odor intensity of the sample to the odor intensities of a series of concentrations of the reference odorant 1-butanol (n-butanol). The two procedures differ in the method by which the diluted 1-butanol vapors are prepared. In Procedure A (dynamic scale method), a dynamic-dilution apparatus is used. This is equipped with a series of sniffing ports from which constant concentrations of 1-butanol emerge at constant volumetric flow rates in air. In Procedure B (static-scale method), a series of Erlenmeyer flasks containing known concentrations of 1-butanol in water is used.
Scope
1.1 These practices are designed to outline a preferred means for referencing the odor intensities of a material in the suprathreshold region.
1.2 The general objective is to reference the odor intensity rather than other odor properties of a sample.
1.3 These practices are designed to reference the odor intensity on the ASTM Odor Intensity Referencing Scale of any odorous material. This is done by a comparison of the odor intensity of the sample to the odor intensities of a series of concentrations of the reference odorant, which is 1-butanol (n-butanol).
1.4 The method by which the reference odorant vapors are to be presented for evaluation by the panelists is specified. The manner by which the test sample is presented will depend on the nature of the sample, and is not defined herein.
1.5 Test sample presentation should be consistent with good standard practice
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.