Standard
Historical
Last Updated: Oct 14, 2015
Track Document
ASTM D5578-04(2010)
Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method)
Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method)
D5578-04R10
ASTM|D5578-04R10|en-US
Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method)
Standard
D5578 Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method)>
new
BOS Vol. 11.07 Committee D22
$
77.00
In stock
Significance and Use
Ethylene oxide is a major industrial chemical with production volume ranked in the top 25 chemicals produced in the United States. It is used in the manufacture of a great variety of products as well as being a sterilizing agent and fumigant.
This test method provides a means of determining exposure levels of ETO in the working environment at the presently recommended exposure guidelines.
OSHA Permissible Exposure Limit (PEL) 1 ppm, 15-min excursion limit 5 ppm (CFR, Part 1910, Subpart Z, Section 1910.1047).
ACGIH Threshold Limit Value (TLV) 1 ppm (1.8 mg/m3), suspected human carcinogen.
Scope
1.1 This test method covers a method of collecting and analyzing samples to determine the amount of ethylene oxide (ETO) present in workplace atmospheres.
1.2 This test method can be used to provide a time-weighted average (TWA) over the concentration range from 0.2 to 4 ppm (v).
1.3 This test method can be used to determine 15-min excursions (STEL) ranging from 1 to 25 ppm (v).
1.4 The values stated in SI units are to be regarded as the standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See Section 9 for specific safety hazards.