Standard
Historical
Last Updated: Dec 31, 2010
Track Document
ASTM D4771-02
Standard Performance Specification for Knitted Upholstery Fabrics for Indoor Furniture
Standard Performance Specification for Knitted Upholstery Fabrics for Indoor Furniture
D4771-02
ASTM|D4771-02|en-US
Standard Performance Specification for Knitted Upholstery Fabrics for Indoor Furniture
Standard
D4771 Standard Performance Specification for Knitted Upholstery Fabrics for Indoor Furniture>
new
BOS Vol. 07.02 Committee D13
$
77.00
In stock
Abstract
This performance specification covers the performance requirements for knitted upholstery fabrics as used in the manufacture of new indoor furniture for general domestic use. These requirements apply to both the wale and course directions for those factors where each fabric direction is pertinent. This performance specification is not applicable to fabrics used in contract, porch, deck, or lawn furniture; nor for woven fabrics, bonded or laminated fabrics, or surface-coated fabrics (such as vinyls and urethanes). The fabric shall be tested for its resistance to yarn slippage, dimensional change, and colorfastness to water, solvent, crocking, burnt gas fumes, light, and ozone. After the fabric has been tested, it shall be evaluated for any change in hand, character, or appearance. The fabric shall be evaluated for cracking or peeling of the back coating to check the coating durability. The fabric flammability shall also be tested. All upholstery fabrics shall be evaluated for cigarette ignition resistance.
Scope
1.1 This specification covers the performance requirements for knitted upholstery fabrics as used in the manufacture of new indoor furniture for general domestic use. These requirements apply to both the wale and course directions for those factors where each fabric direction is pertinent.
1.2 This specification is not applicable to fabrics used in contract, porch, deck, or lawn furniture; nor for woven fabrics, bonded or laminated fabrics, or surface-coated fabrics (such as vinyls and urethanes).
1.3 The following safety hazards caveat pertains only to the test methods described in this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See Note 2.