Standard
Historical
Last Updated: May 02, 2012
Track Document
ASTM D2484-06
Standard Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape
Standard Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape
D2484-06
ASTM|D2484-06|en-US
Standard Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape
Standard
D2484 Standard Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape>
new
BOS Vol. 10.01 Committee D09
$
77.00
In stock
Abstract
This specification covers the manufacture, testing, and standard requirements of four types of electrical insulating tape consisting of a polyester plastic film coated on one side with a pressure-sensitive adhesive. Besides differences in nominal thickness, Type 1 is a general-purpose tape coated with a thermoplastic adhesive that is not chemically heat reactive, while Types 2, 3, and 4 are general-purpose tapes coated with a heat-reactive thermosetting adhesive. The tapes shall be tested accordingly and consequently conform to standard widths, lengths, and thicknesses, and other specific properties such as elongation, penetraction, high-humidity insulation resistance (measure of corrosion), strain relief (shrinkage), breaking strength, dielectric breakdown, and adhesion to steel and backing.
Scope
1.1 This specification covers electrical insulating tape consisting of a polyester plastic film coated on one side with a pressure-sensitive adhesive.
1.2 The values stated in SI units are to be regarded as the standard. The values given in parenthesis are provided for information only.
Note 1 - This standard and IEC 60454-3-2 and -3 are similar but not equivalent in all details.