Standard
Historical
Last Updated: May 20, 2019
Track Document
ASTM D751-06(2011)
Standard Test Methods for Coated Fabrics
Standard Test Methods for Coated Fabrics
D0751-06R11
ASTM|D0751-06R11|en-US
Standard Test Methods for Coated Fabrics
Standard
D751 Standard Test Methods for Coated Fabrics>
new
BOS Vol. 09.02 Committee D11
$
96.00
In stock
Significance and Use
Coated fabrics and rubber products made from coated fabrics are important items of commerce, and adequate test methods must be available to ensure the quality of these products. These test methods provide for this testing capability.
Scope
1.1 These test methods cover, but are not limited to, rubber-coated fabrics, that is, tarpaulins, rainwear, and similar products.
1.2 The scope of each of these test methods appears in the section in which the test method is described.
1.3 The test methods appear in the following sections:
| Test Method | Section |
| Dimensions and Mass | 7-10 |
| Breaking Strength | 11 |
| Procedure A | 12-15 |
| Procedure B | 16 |
| Elongation | 17 |
| Bursting Strength | 18-21 |
| Puncture Resistance | 22-25 |
| Tearing Strength | 26 |
| Procedure A | 27 |
| Procedure B | 28-31 |
| Trapezoidal Tear | 32-35 |
| Hydrostatic Resistance | 36 |
| Procedure A | 37-40 |
| Procedure B | 41-44 |
| Adhesion Coating (to Fabrics) | 45-48 |
| Strength of Coating | 49-53 |
| Tack-Tear Resistance | 54-58 |
| Low Temperature Bend Test | 59 |
| Low Temperature Impact Test | 60 |
| Low-Temperature Crack Resistance | 61-65 |
| Seam Strength | 66-71 |
| Accelerated Heat Aging (Oven Method) | 72-79 |
| Dead Load Seam Strength | 80-83 |
| Blocking Resistance at Elevated Temperatures | 84-88 |
| Crush Resistance | 89-93 |
| Wicking of Coated Cloth | 94-98 |
1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.