Standard
Historical
Last Updated: Jun 16, 2016
Track Document
ASTM C1646/C1646M-08a
Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete
Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete
C1646_C1646M-08A
ASTM|C1646_C1646M-08A|en-US
Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete
Standard
C1646/C1646M Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete>
new
BOS Vol. 04.02 Committee C09
$
77.00
In stock
Significance and Use
This practice provides standard requirements for evaluating frost-susceptible coarse aggregate in air-entrained concrete subjected to freezing and thawing in accordance with Test Method C 666/C 666M
Concrete containing frost-resistant paste may not be resistant to freezing and thawing if it contains coarse aggregate that becomes critically saturated. An aggregate particle is considered to be critically saturated when there is insufficient unfilled pore space to accommodate the expansion of water that accompanies the freezing.
The potential of the coarse aggregate to cause damage due to cycles of freezing and thawing is evaluated by Test Method C 666/C 666M
Scope
1.1 This specification covers materials for use in hydraulic-cement concrete mixtures to be placed by shotcreting. It does not cover mixing, placement, curing, or protection of the concrete placed by shotcreting.
1.2 This specification covers materials for both wet-mix and dry-mix shotcreting.
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of the standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.