Standard
Historical
Last Updated: Oct 08, 2018
Track Document
ASTM C1330-02(2013)
Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
C1330-02R13
ASTM|C1330-02R13|en-US
Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
Standard
C1330 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants>
new
BOS Vol. 04.07 Committee C24
$
77.00
In stock
Significance and Use
5.1 This specification is designed to give some indication as to the differences in performance for various cylindrical sealant backings.
5.2 Although this specification qualifies a cylindrical sealant backing for use, it does not address the compatibility of the backing with the sealants with which it will make contact. Sealant compatibility should be confirmed by the sealant manufacturer. Compatibility characteristics of sealants in contact with cylindrical sealant backings can be determined by Test Method C1087.
Abstract
This standard specification covers the basic requirements for cylindrical sealant backing for use with cold liquid-applied sealants. Cylindrical sealant backings are classified into three types: type C, type O, and type B, composed predominantly of closed cell material, open cell material, and bi-cellular material, respectively. Test methods for cylindrical sealant backing include water absorption, density, outgassing, compression deflection and recovery, and tensile strength. The sealant shall be clean, free of scale, foreign matter, oil, or water.
Scope
1.1 This specification covers the basic requirements for cylindrical sealant backing to be used with cold liquid applied sealants for use in building seals.
1.3 The committee with jurisdiction over this standard is not aware of any comparable standards published by other ASTM committees or other organizations.
1.4 This specification may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.