Standard
Historical
Last Updated: Aug 13, 2013
Track Document
ASTM C400-98(2006)
Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid
Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid
C0400-98R06
ASTM|C0400-98R06|en-US
Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid
Standard
C400 Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid>
new
BOS Vol. 04.01 Committee C07
$
77.00
In stock
Significance and Use
Since all limes and waste acid solutions are different, this test method evaluates the relative quantity of a given lime needed for the neutralization of a specific quantity of acid.
Liming materials have a specific basicity factor or measure of alkalinity which can be used for comparing their relative neutralizing power. It avoids dependence on chemical analysis and is determined as grams of calcium oxide equivalents per kilogram of liming material.
Likewise, specific waste acids have an acid value that can be expressed as grams of hydrochloric acid equivalent per litre of acid waste. This value is related on a stoichiometric basis to lime neutralization requirements of a liquid acid waste.
Scope
1.1 This test method covers the testing of quicklime and hydrated lime for use in the treatment of waste acid solutions and includes the characterization of the liming material and of the acid waste.
Note 1When agreed upon by the manufacturer and the purchaser, this method may be used directly to evaluate the lime requirement for a plant waste acid and in the preparation of the lime slurry; the pH, the time, temperature, and other conditions of treatment may be adjusted to conform to plant practice. Otherwise the test shall be performed as described in this method.
Note 2Under some conditions of test the lime requirement may vary substantially from that indicated by ultimate chemical analysis or by the use of a determination of available alkalinity by titration to a stoichiometric end point.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.