There is no PDF download available at this time, however you may purchase a copy of this document from the IHS Standards Store
Standard
Withdrawn, No replacement
Last Updated: Jan 22, 2021
Track Document
ASTM C386-93(2012)
Standard Practice for Use of Chemical-Resistant Sulfur Mortar (Withdrawn 2021)
Standard Practice for Use of Chemical-Resistant Sulfur Mortar (Withdrawn 2021)
C0386-93R12
ASTM|C0386-93R12|en-US
Standard Practice for Use of Chemical-Resistant Sulfur Mortar (Withdrawn 2021)
Standard
C386 Standard Practice for Use of Chemical-Resistant Sulfur Mortar (Withdrawn 2021)>
new
BOS Vol. 04.05 Committee COS
$
0.00
Out of stock
Abstract
This practice covers detailed information on the handling, installation, and proper use of chemical-resistant sulfur mortar. The sulfur mortar shall be stored in unopened containers and in a clean, dry place to prevent contamination of the product. Sulfur mortar must be heated and molten in order to be used. Adequate ventilation should be provided whether sulfur mortars are used. All surfaces which molten sulfur mortar will contact must be dry to prevent splattering. Horizontal joints may be formed by resting each brick or tile on three spacers which are placed in a triangular pattern. The floor shall be given a skim coat of sulfur mortar prior to installing brick or tile. The chemical resistance of sulfur mortars shall be determined.
Scope
1.1 This practice provides detailed information on the handling, installation, and proper use of chemical-resistant sulfur mortar such as those covered in Specification C287.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific safety precautions, see Section 5.