Standard
Historical
Last Updated: Oct 16, 2015
Track Document
ASTM B903-10
Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
B0903-10
ASTM|B0903-10|en-US
Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
Standard
B903 Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement>
new
BOS Vol. 02.01 Committee B05
$
86.00
In stock
Abstract
This specification covers seamless, internally enhanced copper tube, in straight lengths or coils, suitable for use in refrigeration and air-conditioning products or other heat exchangers. The material of manufacture shall be cast billet, bar, tube, or so forth of copper UNS No. C12200 and shall be of such purity and soundness as to be suitable for processing into the tubular product described. The tube shall be manufactured by such hot- and cold-working processes needed to produce a homogenous, uniform wrought structure in the finished product. The material shall conform to the chemical composition requirements specified. The grain size shall be determined in the wall beneath the ridges. The microstructure shall show complete recrystallization and shall have an average grain size within the limits specified. As-fabricated and O (annealed) temper tube shall conform to the mechanical properties specified. The specimens of annealed product shall withstand the specified expansion tested as specified. Each tube shall be subjected to an eddy-current test. Tubes shall be tested normally in the fabricated temper; however, they may be tested in the annealed temper at the option of the manufacturer.
Scope
1.1 This specification establishes the requirements for seamless, internally enhanced copper tube, in straight lengths or coils, suitable for use in refrigeration and air-conditioning products or other heat exchangers.
1.2 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3 Tubes for this application are manufactured from the following copper:
| Copper UNS No. | Type of Metal |
| C12200 | Phosphorized, high residual phosphorus (DHP) |
1.4 The following pertains to the test method described in 15.4 of this specification: This standard does not purport to address all the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.