Standard
Active
Last Updated: Nov 25, 2025
Track Document
ASTM B558-25
Standard Practice for Preparation of Nickel Alloys for Electroplating
Standard Practice for Preparation of Nickel Alloys for Electroplating
B0558-25
ASTM|B0558-25|en-US
Standard Practice for Preparation of Nickel Alloys for Electroplating
Standard
B558 Standard Practice for Preparation of Nickel Alloys for Electroplating>
new
BOS Vol. 02.05 Committee B08
$
64.00
In stock
ASTM International
Significance and Use
2.1 The proper preparation of nickel alloy surfaces for nickel electroplating is often critical to the plating’s performance.
2.2 This practice outlines recommended procedures to produce adherent nickel electrodeposits on nickel alloy surfaces.
Abstract
This practice serves as a guide for the preparation of nickel alloy substrates that shall undergo electroplating processes involving adherent nickel electrodeposits. Surface cleaning may be done either by degreasing (including vapor degreasing, solvent wash, emulsion cleaning, or soak cleaning), or electrolytic alkaline cleaning. The choice of cleaning procedure to use shall be decided upon by the condition of the surface. Conversely, surface activation treatment shall be performed either by anodic-cathodic sulfuric acid treatment, acid-nickel chloride treatment, or anodic etching in a low pH watts bath. The choice of activation treatment to employ shall be determined by the condition of the surface and the specific type of nickel alloy involved.
Scope
1.1 This practice is intended to serve as a guide for producing adherent electrodeposits of nickel on nickel alloys. Only those methods that are well known and generally practiced are included. Methods that have been used successfully but not on a broad scale are not included. Once nickel is applied, other metals may be electroplated on the product.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.