Standard
Historical
Last Updated: Dec 22, 2017
Track Document
ASTM A807/A807M-13
Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
A0807_A0807M-13
ASTM|A0807_A0807M-13|en-US
Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
Standard
A807/A807M Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications>
new
BOS Vol. 01.06 Committee A05
$
86.00
In stock
Significance and Use
4.1 Structural plate structures function structurally as a flexible ring that is supported by and interacts with the compacted surrounding soil. The soil placed around the structure is thus an integral part of the structural system. It is therefore important to ensure that the soil structure is made up of acceptable material and is well constructed. Field verification of soil structure acceptability using Test Methods D1556, D2167, D6938, or D2937, as applicable, and comparing the results with either Test Methods D698 or D1557, in accordance with the specifications for each project, is the most common basis for installation of an acceptable structure. Depending on the backfill used, other qualitative or performance-based methods acceptable to the engineer may also be used. The required density and method of measurement are not specified by this practice, but must be established in the specifications for each project.
Scope
1.1 This practice covers procedures, soils, and soil placement for the proper installation of corrugated steel structural plate pipe, pipe-arches, arches, and underpasses produced to Specification A761/A761M, in either trench or embankment installations. A typical trench installation and a typical embankment (projection) installation are shown in Figs. 1 and 2, respectively. Structural plate structures as described herein are those structures factory fabricated in plate form and bolted together on site to provide the required shape, size, and length of structure. This practice applies to structures designed in accordance with Practice A796/A796M.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.3 The values stated in either inch-pound units or SI units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way. SI units are shown in brackets in the text for clarity, but they are the applicable values when the installation is to be performed using SI units.